Logic MegaRAID Express User's Guide

Preface
xiii
Preface,
Continued
Disclaimer
This manual describes the operation of the LSI Logic MegaRAID Express 500 Disk Array
Controller. Although efforts have been made to assure the accuracy of the information contained
here, LSI Logic expressly disclaims liability for any error in this information, and for damages,
whether direct, indirect, special, exemplary, consequential or otherwise, that may result from such
error, including but not limited to the loss of profits resulting from the use or misuse of the manual
or information contained therein (even if LSI Logic has been advised of the possibility of such
damages). Any questions or comments regarding this document or its contents should be addressed
to LSI Logic at the address shown on the cover.
LSI Logic Corporation provides this publication “as is” without warranty of any kind, either
expressed or implied, including, but not limited to, the implied warranties of merchantability or
fitness for a specific purpose.
Some states do not allow disclaimer of express or implied warranties or the limitation or exclusion
of liability for indirect, special, exemplary, incidental or consequential damages in certain
transactions; therefore, this statement may not apply to you. Also, you may have other rights which
vary from jurisdiction to jurisdiction.
This publication could include technical inaccuracies or typographical errors. Changes are
periodically made to the information herein; these changes will be incorporated in new editions of
the publication. LSI Logic may make improvements and/or revisions in the product(s) and/or the
program(s) described in this publication at any time.
Requests for technical information about LSI Logic products should be made to your LSI Logic
authorized reseller or marketing representative.