Logic Symbios SYM20810 PCI to SCSI Host Adapter

Installing the Host Adapter Device Driver Software 1-13
Step 5. The name of the driver for the SYM20810 is “Symbios
8100ASP, 2081x PCI SCSI Adapter; 53C810A Device.” If
this driver is not listed, follow the instructions in the Symbios
SDMS Windows 95 or Windows NT driver documentation. This
documentation can be found on the LSI Logic web site at
www.lsilogic.com.
Step 6. If there are no red X’s or yellow question mark icons next to the
listing for the SYM20810, the driver is loaded and ready to use.
Please keep in mind that Windows NT only displays the driver
information, not every controller found by the driver.
For information on how to change the Symbios driver in your system or
to add a driver to a Windows 95 or Windows NT system that is set up
with a different SCSI driver, refer to the LSI Logic Symbios PCI SCSI
Device Management System SDMS 4.0 User’s Guide or the software
documentation that accompanies the driver on your diskette or on the LSI
Logic web site. The file names are 95.txt for Windows 95 and
8xxnt.txt for Windows NT.
1.3.3 OS/2
The Symbios SYM8XX.ADD device driver complies with the IBM OS/2
Adapter Device Driver specification, and works with third party
applications that comply with the same specification. For complete
installation instructions, refer to the OS2.txt file supplied with your
Symbios OS/2 SCSI driver software. The latest version of this driver and
the text file may also be found on the LSI Logic web site at
www.lsilogic.com.