User`s guide

LSI Confidential
2-2 Hardware Installation
Copyright © 2006-2007 by LSI Corporation. All rights reserved.
2.2 More Detailed Installation Instructions
The following steps provide detailed installation instructions:
1. Unpack the HBA in a static-free environment. Contact LSI or your
OEM support representative if the HBA appears to be damaged.
2. Turn off the system power and physically disconnect the power cord.
3. Remove the cover from the system and disconnect the system from
any networks.
4. Insert the HBA in an available PCI Express slot. Press down gently
but firmly to properly seat the HBA in the slot. Figure 2.1 illustrates
how to insert the HBA in a PCI Express slot.
5. Install the bracket screw, when present, or engage the system’s
retention mechanism to secure the HBA to the system’s chassis.
6. Connect the serial cables between the HBA and the serial hard disk
drives (HDD). Figure 2.1 illustrates the locations of the connectors on
your HBA.
7. Replace the system’s cover, reconnect the power cords, and then
power-up the system.
LSI PCIe to SAS HBA hardware installation is complete.