Fire Detection Control Panels Specification Sheet

ManualsBrandsLST ManualsNetwork CardBC06-2

BC06_DBL_LST_EN_0826.PDF • PAGE 2

ABuilding Safety. Building Security.

Clear Concept

The Fire Detection Control Panels BC06-1 and BC06-2

have been designed for use in small ﬁ re detection sys-

tems and already in the basic version they provide the

following features:

• 4 conventional detector lines permit the connection

of automatic detectors and manual call points in con-

ventional technology as well as special detectors with

contact output. Each detector line can be individually

parameterised as detector zone for ﬁ re alarms or as

detector zone for fault messages.

• If automatic detectors and manual call points are con-

nected together on one detector line, their activati-

ons can be differentiated and evaluated differently by

the control panel. To this aim, the manual call points

must be equipped with a special coding module.

• A slot for connecting the Zone Extension Board

ZEB2-1 is available to facilitate the extension to 6

conventional detector lines.

The installation of the zone extension board is auto-

matically detected by the control panel and the corre-

sponding parameters are set to initial values.

• Two individually monitored, separately activated siren

outputs with an output current of 1A and 0.5A respec-

tively, allow for the connection of acoustic or optical

signalling devices. When parameterised accordingly,

the siren outputs can also be operated as evacuation

circuits.

• Dry relay outputs indicate the alarm and fault conditi-

ons of the control panel. In addition, 8 open-collector

outputs with ﬁ xed preset functions as well as two au-

xiliary inputs whose parameters can be freely set are

available for general control tasks.

• Logical combinations of detector zones for the acti-

vation of external alarming devices allow for a high

degree of ﬂ exibility. Thus, no additional expenses

arise for external relays or logic gates. Thanks to the

wide range of parameterisation possibilities, individu-

al requirements even under the most difﬁ cult ambient

conditions can be combined into a reasonable ﬁ re

protection strategy.

• All events that occur can be output in English via a

connected printer or PC. Thus, all system conditions

and user operations that occurred are documented in

a clearly laid out way.

• The Fire Detection Control Panel BC06-2 includes a

4-digit, non-resettable alarm counter which indicates

the total number of alarms by means of an LC display

in the operating ﬁ eld.

• A possible breakdown of the central processing board

is securely detected and displayed by the system.

• The processor-monitored power supply ensures per-

manent supervision and charging of the batteries.

This way, even during a power failure the untroubled

and uninterrupted operation (for more than 72 hours

depending on the design of the batteries) is guaran-

teed.

• Three hierarchised authorization levels for operation

and parameterisation provide a high degree of secu-

rity against unauthorized access.

• The control panel is easily operated and the parame-

ters are set via the display and operating ﬁ eld. LEDs

indicate the current menu and the selected parame-

ter. This facilitates user guidance during commissio-

ning, operation and maintenance.

• The initial commissioning of the control panel is sig-

niﬁ cantly facilitated by the practical factory settings.

This guarantees easy and time-saving commissio-

ning.

The extremely ﬂ at wall-mount cabinet allows for an easy

mounting in virtually any place of the building. Thanks to

its modern, ageless design, architectural requirements

and demands of the respective regulations are ideally

combined. Thanks to the compact design, the standard

case can accommodate batteries with up to 7Ah also

in the event of full extension (central processing board,

optional zone extension board and an auxiliary module)

of the control panel. Series BC06 thus stands for modu-

larity and easy expansion.

This product complies with all relevant standards of

EN 54 and is tested by the VdS. LST‘s high quality level

is secured by a permanently monitored quality manage-

ment system certiﬁ ed to ISO 9001.