Protocol Printer Specification Sheet

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL [phone] • FAX [phone]
[e-mail] • WWW.LST.AT • ALL RIGHTS RESERVED
DPU414-30B_DBL_LST_EN_0804.PDF • PAGE 1
ABuilding Safety. Building Security.
Protocol Printer
DPU414-30B
Description
The Protocol Printer DPU414 is connected to a fi re de-
tection control panel via a serial interface module.
Depending on the fi re detection control panel, the log-
ging includes the element text of the activated detector,
the detector zone number, the detector number, date
and time as well as any change in the operating conditi-
on of the control panel at the beginning and at the end
of the event. The data is printed as text in clear, with
80 characters per line. Furthermore, in conjunction with
Fire Detection Control Panels Series BC216 and BC016,
the whole event memory and the parameterised system
confi guration can be printed. If ADM loop technology is
used, the current analogue values of the detectors, the
analogue values of the previous 6 months, as well as a
maintenance recommendation for every single detector
can be printed once or periodically as well.
The protocol printer can be mounted into a 19“ cabinet
by means of the 19“ Kit DPU2-1E. The printer is supplied
through the optional external AC-Adapter PW4007-E1.
In addition, an optional stand-by battery can be installed
into the printer.
• Thermal printer with 80 characters
per line
• Printout of event data, analogue
values of detectors, and system
confi guration
• Optional stand-by battery can be
installed
• Installation into 19” rack possible
Specifi cations
Power supply optional external AC-Adapter PW4007-E1
Ambient temperature 0°C to +40°C
Relative humidity 30 – 80% (no condensation)
Dimensions W × H × D 160 × 170 × 66.5 (mm)
Weight 580g
Order number 227003
Order name Protocol Printer/Thermal DPU414-30B