Remote Tableau Drive Unit Brochure

ManualsBrandsLST ManualsNetwork CardPTU288-1

PTU288-1_DBL_LST_EN_0804.PDF • PAGE 1

ABuilding Safety. Building Security.

Remote Tableau Drive Unit

PTU288-1 and Accessories

Description

The Remote Tableau Drive Unit PTU288-1 allows to op-

tically signal events of a Fire Detection Control Panel

Series BC216 or BC016, or of an Extinguishing Control

Panel Series LC216, on an optional synoptic remote

tableau. In addition, a built-in buzzer signals the alarm

or fault condition of the control panel.

Up to 3 LED Display Fields LAB48 or LED Connection

Modules LAM48-1 can be connected to the remote tab-

leau drive unit in any combination.

In accordance to the parameterisation, the LEDs can be

used to display the conditions of detectors, detector zo-

nes, actuations, actuation elements, alarming devices,

transmitting devices, extinguishing systems or ﬂ ooding

zones as well as the most important system conditions

of the ﬁ re detection control panel (e.g., summary alarm,

fault condition or disablement condition). If needed, it is

also possible to combine several events into a summary

display.

Furthermore, the PTU288 has 5 freely parameterisable

control inputs.

The remote tableau drive unit is connected to the ﬁ re

detection control panel via the INFO bus. Auxiliary mo-

dules are not needed for connection to Control Panels

Series BC216. A Serial Interface Module SIM016-3 is

necessary for connecting the PTU288 to a Fire Detec-

tion Control Panel Series BC016.

The PC software PARSOFT is used to parameterise the

remote tableau drive unit via the USB interface.

The componentry is prepared for direct installation into

the LED Display Tableau LAT288-1 or LAT288-1CE. The

componentry can also be mounted in any housing in the

LST standard grid, using the supplied mounting parts.

• Optically and acoustically signals

the events of a ﬁ re detection or

extinguishing control panel

• Actuation of up to 144 LED pairs,

single LEDs or relays

• Single or summary indication

parameterisable

• Connection to the INFO bus

• Easy parameterisation by means of

PC software PARSOFT

Speciﬁ cations

Operating voltage 15 – 31VDC

Current consumption at 24V typ. 15mA (without LED modules)

Ambient temperature -20°C to +60°C

Dimensions L × W × H 150 × 75 × 20 (mm)

Weight 76g

Order number 252012

Order name Remote Tableau Drive Unit PTU288-1

Summary of content (3 pages)

PAGE 1
Remote Tableau Drive Unit PTU288-1 and Accessories • Optically and acoustically signals the events of a ﬁre detection or extinguishing control panel • Actuation of up to 144 LED pairs, single LEDs or relays • Single or summary indication parameterisable • Connection to the INFO bus • Easy parameterisation by means of PC software PARSOFT Description The Remote Tableau Drive Unit PTU288-1 allows to optically signal events of a Fire Detection Control Panel Series BC216 or BC016, or of an Extinguishing Control
PAGE 2
LED Connection Module LAM48-1 The LED Connection Module LAM48-1 serves, as auxiliary module of a Remote Tableau Drive Unit PTU288-1, to actuate up to 48 single LEDs, or relay outputs of a Relay Module RL58-1 or RL58-2, in any combination. In this way graphical orientation tableaus for signalling the events of a ﬁre detection or extinguishing control panel can be easily designed. The signals are available on pin connectors, which are prepared for connecting assembled LED cords.
PAGE 3
LED Connection Cord The 2-wire connection cord serves to connect light emitting diodes or relays to the LED Connection Module LAM48-1. The cord is needed if other than the pre-assembled LEDs are used, or if more than two Relay Modules RL58-1 or RL58-2 – which can be directly connected to the LED connection module via ﬂat cable – have to be actuated. At one end of the cord there is a connector which ﬁts to the pin connector of the LED Connection Module LAM48-1, and the other end of the cord is open.