Quick Start Guide

Network PTZ Camera·Quick Start Guide
23
23
Ceiling Mounting without Junction Box
1. Rotate the base plate counterclockwise to separate it from the PTZ
camera, as shown in Figure 2-19 and Figure 2-20.
Front View of Base Plate
OPEN
Base Plate on the Bottom of the Dome
Figure 2-19 Base Plate for PTZIP4XX Series PTZ Camera
Front View of Base PlateBase Plate on the Bottom of the Dome
OPEN
Figure 2-20 Base Plate for PTZIP4XX Series (IR) PTZ Camera
2. Attach the drill template (supplied) to the place where you want
to fix the PTZ camera, and make sure the front arrow appoints to
the monitoring area.