Quick Start Guide

Network PTZ Camera·Quick Start Guide
27
27
After PTZIP4XX series (IR) PTZ camera is installed, tighten the fixing
screw with a screwdriver as shown in Figure 2-27.
Fixing Screw
Figure 2-27 Tighten the Fixing Screw
2.3.2 In-ceiling Mounting
Notes:
 Reserve at least 250 mm of height for in-ceiling mounting.
 The thickness of the ceiling shall range from 5 mm to 40 mm.
 Make sure the ceiling is strong enough to withstand more than
four times the weight of the PTZ camera and its accessories
Steps:
1. Rotate the base plate counterclockwise to separate it from the PTZ
camera, as shown in Figure 2-28.