Quick Start Guide

Network PTZ Camera·Quick Start Guide
34
34
5. Click OK to activate the camera and enter the live view interface.
3.2.2 Activation via IP PORTAL Software
IP PORTAL software is used for detecting the online device, activating
the device, and resetting the password.
Get the IP PORTAL software from the supplied disk or the official
website, and install the IP PORTAL according to the prompts.
Follow the steps to activate the camera.
Steps:
1. Run the IP PORTAL software to search the online devices.
2. Check the device status from the device list, and select an inactive
device.
Figure 3-4 IP PORTAL Interface
Note: