DVR User Manual For H.
Digital Video Recorder User Manual CAUTION Please read this user manual carefully to ensure that you can use the device correctly and safely We do not warrant all the content is correct. The contents of this manual are subject to change without notice This device should be operated only from the type of power source indicated on the marking label. The voltage of the power must be verified before using.
Digital Video Recorder User Manual Table of Contents 1 Introduction......................................................................................................................................................................... 1 1.1 DVR Introduction ............................................................................................................................................................................................... 1 1.2 Main Features.......................................
Digital Video Recorder User Manual 4.1.2 Time & date ........................................................................................................................................................................................... 18 4.1.3 DST ....................................................................................................................................................................................................... 19 4.2 Live configuration.................................
Digital Video Recorder User Manual 4.6.2 Sub stream ............................................................................................................................................................................................ 35 4.6.3 Email ..................................................................................................................................................................................................... 36 4.6.4 Other settings ..................................
Digital Video Recorder User Manual 7.2 Remote Surveillance through Apple PC............................................................................................................................................................ 55 7.2.1 On LAN.................................................................................................................................................................................................. 56 7.2.2 On WAN ......................................................
Digital Video Recorder User Manual 1 Introduction 1.1 DVR Introduction This model of DVR (Digital Video Recorder) is designed for high performance CCTV solutions. It adopts state of the art video processing chips and embedded Linux system. Meanwhile, it utilizes most advanced technologies, such as standard H.264 with low bit rate, Dual stream, SATA interface, VGA output mouse supported, IE browser supported with full remote control, mobile view(by phones), etc.
Digital Video Recorder User Manual • Support saving recorded files with AVI standard format to a remote computer through internet RECORD & PLAYBACK Record modes: Manual, Schedule, Motion detection and Sensor alarm recording Support recycle after HDD full Resolution, frame rate and picture quality are adjustable 128MB for every video file packaging 4 audio channels available Two record search mode: time search and event search Support 4/8/16 screen playback simultaneously Support deleting and locking the
Digital Video Recorder User Manual live view, manual record, playback, PTZ control and remote live view • Support 1 administrator and 63 users. • Support event log recording and checking, events unlimited NETWORK Support TCP/IP, DHCP, PPPoE, DDNS protocol Support IE browser to do remote view Support setup client connection amount Support dual stream. Network stream is adjustable independently to fit the network bandwidth and environment.
Digital Video Recorder User Manual 2 Hardware Installation Notice: Check the unit and the accessories after getting the DVR. Please disconnect the power before being connected to other devices. Don't hot plug in/out 2.1 Install Hard Drive 2.1.1 Install Hard Drive Notice: 1.This series support one SATA hard drive. Please use the hard drive the manufacturers recommend specially for security and safe field. Please refer to “Appendix C Compatible Devices 2”. 2.
Digital Video Recorder User Manual 2.2 Front Panel Instructions Notice: The front panel descriptions are only for reference; please make the object as the standard. Type Item Name Description 1 Work state indicator Power HDD Net Backup Play REC MENU/+ BACKUP/- Compound button 2 RECORD/FOCUS REW/SPEED SEARCH/ZOOM PLAY /IRIS FF/ P.T.Z.
Digital Video Recorder User Manual Item Type 4 Input button 5 Name Description IR receiver Direction button Multi-screen Enter button IR 6 USB USB port 7 POWER POWER Change direction to select items Change screen display mode like1/4/9/16 channel Confirm selection For remote controller To connect external USB devices like USB flash, USB HDD for backup or update firmware; or connect to USB mouse Shot switch off 2.3 Rear Panel Instructions 2.3.
Digital Video Recorder User Manual Item Name Description 1 Video out 2 Spot out 3 4 5 6 7 8 9 10 11 12 13 14 Audio out Video in DC12V VGA port LAN USB port P/Z K/B ALARM OUT + 5V and GND ALARM IN Audio in Connect to monitor Connect to monitor as an AUX output channel by channel.
Digital Video Recorder User Manual Item Name Description 1 Video out Connect to monitor Connect to monitor as an AUX output channel by channel. Only video display, no menu show Audio output, connect to the sound box Video input channels from 1-8 POWER INPUT VGA output, connect to monitor Network port Connect USB mouse or connect external USB devices Connect to speed dome Connect to keyboard 1-ch relay output.
Digital Video Recorder User Manual Item Name Description 1 2 3 4 5 6 7 8 9 10 11 Audio out Audio in VGA port Video out P/Z K/B ALARM OUT + 5V and GND ALARM IN USB port NET 12 Spot out 13 14 Video in DC12V Audio output, connect to the sound box 4 CH Audio input VGA output, connect to monitor Connect to monitor Connect to speed dome Connect to keyboard 1-ch relay output. Connect to external alarm.
Digital Video Recorder User Manual Item Name 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Power Button INFOR Button REC Button Digital Button Multi Screen Button SEARCH Button MENU Button ENTER Button Direction Button +/- Button Playback Control Button AUDIO Button Auto Dwell Button BACKUP Button 15 PTZ Control Button Fig 2.6 Remote Controller Function Soft switch off to stop firmware running. Do it before power off.
Digital Video Recorder User Manual Operation processes with remote controller to control multi-DVR The device ID of the DVR is 0.
Digital Video Recorder User Manual Click left button to enter. Click right button to cancel setup, or return to the previous. If want to input the value, move cursor to the blank and click. An input window will appear as Fig2.7. It supports digitals, letters and symbols input. Fig 2.7 Digital Numbers and Letters Input Window Users can change some value by the wheel, such as time. Move cursor onto the value, and roll the wheel when the value blinks. It supports mouse drag. I.e.
Digital Video Recorder User Manual 3 Basic Function Instruction 3.1 Power On/Off Before you power on the unit, please make sure all the connection is good. 3.1.
Digital Video Recorder User Manual 3.2 Login User can login and logout the DVR system. User cannot do any other operations except changing the multi-screen display once logout. Fig 3-1 Login Notice: the default user name and password is “admin” and 123456” The concrete operation steps for change password, add or delete user please refer to 4.7 User management configuration for more details. 3.
Digital Video Recorder User Manual 3.3.1 Live playback Click Play screen. button to playback the record. Refer to Figure3-3.
Digital Video Recorder User Manual 4 Main menu setup guide Click right mouse or press ESC button on the front panel, the control bar will display on the bottom of the screen, refer to Fig 4-1: Fig 4-1 menu toolbar Click the icon beside the screen display mode to display a channel select dialog. 6/8 channels can realize single channel big screen. Images can drag to any place to display in the live interface.
Digital Video Recorder User Manual Fig 4-2; press MENU button on the front panel or operate with remote controller also can display the main menu. Click Setup icon will pop-up the configuration menu: Fig 4-2 main menu configuration menu 4.1 Basic configuration Basic configuration includes three sub menus: system、date& time and DST. 4.1.
Digital Video Recorder User Manual Max online uses: set the max user amount of network connection Video output: the resolution of live display interface, range from: VGA800*600, VGA1024*768, VGA1280*1024 and CVBS. Note: When switch between VGA and CVBS will change the menu output mode, please connect to relevant monitor. Language: setup the menu language. Note: after changed the language and video output, the device needs to login again.
Digital Video Recorder User Manual 4.1.3 DST Step1: enter into system configuration basic configuration DST; refer to Fig 4-5: Fig 4-5 basic configuration-DST Step2: in this interface, enable daylight saving time, time offset, mode, start & end month/week/date, etc. Step3: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface. 4.
Digital Video Recorder User Manual Note: Click Camera Name to see a soft keyboard. User can self-define the camera name. Click Shift button to input Capital letters; click Shift button again to input Chinese characters.
Digital Video Recorder User Manual Step5: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface. Fig 4-8 live configuration-host monitor 4.2.
Digital Video Recorder User Manual Setup mask area: click Setting button, enter into live image to press left mouse and drag mouse to set mask area, refer to below picture. Click Apply button to save the setting. Delete mask area: select a certain mask area, click left mouse to delete that mask area, click Apply button to save the setting. Fig 4-10 live configuration-mask Setup mask area Live image mask area 4.
Digital Video Recorder User Manual Parameter Record Audio Meaning Record switch of every channels Enable live record audio Fig 4-11 record configuration-enable Step2: tick off record, audio and record time Step3: user can setup all channels with same parameters, tick off “all”, then to do relevant setup. Step4: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface. 4.3.
Digital Video Recorder User Manual Resolution fps Support CIF Quality The higher the value is, the clearer the Recorded image is. Six options: lowest, lower, low, medium, higher and highest. Range from 1-30(NTSC)1-25(PAL) Fig 4-12 record configuration-record bit rate 4.3.3 Time Step1: enter into system configuration record configuration time; refer to Fig 4-13: Pre-alarm record time: the record time before event happen i.e. record time before motion detection or sensor alarm is triggered.
Digital Video Recorder User Manual Fig 4-13 record configuration-time 4.3.4 Stamp Stamp:User can overlap the channel name and time stamp on video.
Digital Video Recorder User Manual Step2: tick off camera name, time stamp; click Setting button, and then user can use cursor to drag the camera name and time stamp in random positions. Please refer to below Figures: Before drag after drag Step3: user can also setup all channels with same parameters. Step4: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface. 4.3.
Digital Video Recorder User Manual 4.4.1 Schedule The volume means the seven days of a week from Monday to Sunday; the row means 24 hours of a day. Click the grid to do relevant setup. Blue means checked area, gray means unchecked area.
Digital Video Recorder User Manual 4.4.2 Motion Step1: enter into system configuration schedule configuration motion; refer to Fig 4-17: Step2: the setup steps of motion are familiar with schedule; user can refer to 4.4.1 Schedule for details. Fig 4-17 schedule configuration-motion Note: the default schedule of motion detection is full-selected, that is, the color of schedule setting interface is blue. 4.4.
Digital Video Recorder User Manual Note: the default schedule of sensor is full-selected, that is, the color of schedule setting interface is blue. 4.5 Alarm configuration Alarm configuration includes five sub menus: sensor, motion, video loss, other alarm and alarm out. 4.5.1 Sensor Sensor includes three sub menus: basic, alarm handling and schedule.
Digital Video Recorder User Manual Fig 4-20 alarm configuration-sensor-alarm handling Fig 4-21 alarm handling-trigger Step3: After selecting Buzzer, there will be triggered buzzer alarm out; Full screen alarm: when triggered alarm, there will pop up full screen alarm; Email: tick of this function. When an alarm trigged, a notification email will be sent to user’s designed email box including trigger events, time, snap pictures, device name, ID camera name etc. Snap: Select channels.
Digital Video Recorder User Manual Fig 4-22 sensor-schedule Step2: the setup steps of sensor schedule are familiar with schedule; user can refer to 4.4.1 Schedule for details. Note: the default schedule of sensor is full-selected, that is, the color of schedule setting interface is blue. 4.5.2 Motion Motion includes two sub menus: motion and schedule.
Digital Video Recorder User Manual Step4: click Area button to pop-up a window as Fig 4-24: Fig 4-24 motion-area Step5: in the Area interface, user can drag slide bar to set the sensitivity value (1-8), the default value is 4. The higher the value is the higher sensitivity you get.
Digital Video Recorder User Manual 4.5.3 Video loss Step1: enter into system configuration alarm configuration video loss; refer to Fig 4-26: Step2: the setup steps of video loss trigger are familiar with alarm handling; user can refer to Chapter 4.5.1 Sensor alarm handling for more details. Step3: user can also setup all channels with same parameters. Step4: click “apply” button to save the setting; click “exit” button to exit current interface.
Digital Video Recorder User Manual Step2: the setup steps of Buzzer, Email, To Alarm Out are familiar with alarm handling. User can refer to Chapter 4.5.1 Sensor alarm handling for more details. Step 3: select a hard disk in the pull down list box. When the disk capacity is lower than that value, there will appear some text information on the lower right of the live image.
Digital Video Recorder User Manual ③ Buzzer Step1: enter into system configuration buzzer; Step2: tick off Buzzer, set buzzer alarm hold time 4.6 Network configuration Network configuration includes four submenus: network, sub stream, Email and other settings. 4.6.1 Network Step1: enter into system configuration network configuration network; refer to Fig4-29: Step2: HTTP port: the default value is 80. If the value changed, user needs to add the port number when typing IP address in IE address blank .i.e.
Digital Video Recorder User Manual Step3: user can also setup all channels with same parameters. Step4: click “apply” button to save the setting; click “exit” button to exit current interface. Parameter FPS Resolution Quality Meaning Range from: 1-25 Support CIF The higher the value is, the clearer the record image. Six options: lowest, lower, low, medium, higher and highest. Fig 4-30 network configuration-sub stream 4.6.
Digital Video Recorder User Manual Send address/password: sender’s email address/password Receive address: receiver’s email address. Here user can add at least three mail addresses. Click TEST button to test the validity of the mailbox. Attaching image: Tick off this item. The system will attach images when sending the emails. Fig 4-31 network configuration-email 4.6.
Digital Video Recorder User Manual Note: The domain name server that selected by user is a banding domain name of DVR. User should logon the website which provided by the server supplier to register a user name and password firstly, and then apply a domain name on line for the server. After the successful apply, user can access the server from the IE client by inputting that domain name.
Digital Video Recorder User Manual operation: Click “Tools”-- “Folder options” Select the “Show common tasks in folders” in the “Tasks” check box to display the UPnP icon. 1. Domain name Registration (Take www.dyndns.com for example) Note: Users can self-define the hostname, username and password. Input www.dyndns.com in the IE address bar, user can access the domain name registration interface. ” ”Create Free Hostname” to register. For example: Hostname is “abc.dyndns.tv.
Digital Video Recorder User Manual Click” Create Account” button to create user account. 2. DVR Setting (1) Domain name According to the domain name registration of “DDNS”, the domain name for DVR is “www. abc.dyndns.tv” (2) Username and password According to the above registration, username is “bcd”. According to the above registration, password is “123456” 3. Application Connect DVR to the Network Client.
Digital Video Recorder User Manual DDNS server User name Password Host domain Update interval Website provided by dynamic domain name supplier. The optional: www.dns2p.net , www.meibu.com , www.dyndns.comandwww.no-ip.com User name for log in the website of domain name supplier Password for log in the website of domain name supplier The domain name user registered at the supplier’s website. The interval time of upgrading DVR IP address 4.
Digital Video Recorder User Manual Step1: enter into Add user authority referring to Fig 4-35: Step2: In the authority interface, assign the definite operation right for that user. Step3: in the user management interface, click Setup button to modify user name, user type and binding PC MAC address. Step4: select the user that user wants to delete in the user list box and then click Delete button to delete this user.
Digital Video Recorder User Manual Fig 4-36 P.T.Z configuration-serial port Definitions and descriptions of serial port: Parameter Meaning Address The address of the PTZ device Baud rate Baud rate of the PTZ device. Range form: 110, 300, 600, 1200, 2400, 4800, 9600, 19200, 34800, 57600, 115200, 230400, 460800, 921600. Protocol Communication protocol of the PTZ device. Range from: NULL, PELCOP, PELCOD, LILIN, MINKING, NEON, STAR, VIDO, DSCP, VISCA, SAMSUNG, RM110, HY, N-control.
Digital Video Recorder User Manual ② Advance Step1: enter into system configuration P.T.Z configuration advance; refer to Fig 4-37: Step2: in the Advance interface, after clicking preset “Setting” button, a dialog box will pop-up as Fig 4-38: Fig 4-37 P.T.Z configuration-advance Fig 4-38 advance-preset setting a. in the preset set interface, click Setting button to see a window as Fig 3-39: Fig 4-39 preset set-setting b.
Digital Video Recorder User Manual Click Save button to save the settings; click icon to hide the tool bar, right-key can remerge it; click interface. d. in the preset interface, click OK button to save the setting; click Exit button to exit current interface. Step3: in the Advance interface, click cruise “Setting” button, a dialog box will pop-up as Fig 4-40: icon to exit the current Fig 4-40 cruise set a.
Digital Video Recorder User Manual position of preset point. Click Preview button to preview the cruise line and then click OK button to save the setting. Next, click Exit button to exit current interface. c. select a preset point in the cruise line list box and click Delete button to delete that cruise line; click Clear all button to clear all cruise line from the list box; click OK button to save the setting; click Exit button to exit current interface.
Digital Video Recorder User Manual 5 Record search & playback and backup Search configuration includes four submenus: Time Search, Event Search, File Management and Snap. 5.1 Time search Step1: enter into Search configuration Time Search; refer to Fig 5-1: Fig 5-1 Search configuration-time search Step2: select channel, screen display mode, the highlight date in the calendar means have record data Step3: select a date and press Search button.
Digital Video Recorder User Manual Playback buttons Note: when the monitor resolution is VGA800*600, the time search interface will appear a hide button. Click this button to expand the whole interface. 5.
Digital Video Recorder User Manual Step2: After clicking Search button, the searched event information will displayed in the event list box. User can select date, channel. Tick off Motion, Sensor or All accordingly. Step3: double check a certain record file to playback. 5.
Digital Video Recorder User Manual 5.4 Image In this interface, user can set start, end time and channels to search the captured images and save, lock or delete these images. There are at most 2000 images which can be saved in the SATA disk. If there are more images saved in the SATA disks than 2000 images, those additional images will supersede prior images. Double click the image with the left mouse, it will automatically playback from the time of the image captured. 5.
Digital Video Recorder User Manual 6 Manage DVR 6.1 Check system information Check system information includes five submenus: system, event, log, network and online user. 6.1.1 System information In this interface, user can check the hardware version, MCU version, kernel version, device ID, etc. 6.1.2 Event information In this interface, user can check record events according to set date. 6.1.3 Log information In this interface, user can check relevant log information according to set date; 6.1.
Digital Video Recorder User Manual total space show OM at the bottom of screen. Step2: click Refresh button to refresh the disk information of the list box; set the property of the disk then click Apply button to save the setting Step3: select a hard disk and click Format button to star format. Note: all recorded files in the hard disk will be lost after formatted. 2. Advanced User may check model, S/N, firmware, health status of the disk in this interface.
Digital Video Recorder User Manual 7 Remote Surveillance 7.1 IE Remote Surveillance In order to view the DVR from a network it must be connected to a LAN/WAN or internet. The network setup should be done accordingly. Please refer to 4.6 Network Setup. This DVR supports IE browser, on Windows XP and Vista platform. 7.1.1 On LAN Step 1: Enter into the DVR’s Main Menu Setup Network interface to input IP address, Subnet Mask, etc .If using DHCP, please enable DHCP in both the DVR and the router.
Digital Video Recorder User Manual address or domain name. Step 6: IE will download ActiveX automatically. Then a window pops up and asks for user name and password. Input name and password correctly, and enter to view. Note: If you cannot download and install ActiveX, please refer to Appendix A FAQ Q8. 2. Connect the DVR to internet directly. Step 1: Enter into the DVR’s Main Menu Setup Network interface to enable PPPoE and then input user name and password received from your ISP. Next, click ‘Apply’.
Digital Video Recorder User Manual 7.2 Remote Surveillance through Apple PC Note: Because the current plug-in version of client end just only supports 32-bit mode, so the safari browser shall start 32-bit mode. If the browser is the earlier MACOS version, the default setting is 32-bit mode and the setting can be skipped. The Setting steps are as follows: First: Right click safari icon and select “Show in Finder”. Second: Select Applications Right click “Safari. App” Select “Get Info”.
Digital Video Recorder User Manual 7.2.1 On LAN Step 1: After starting Apple computer, click Preferences” ”Internet &Wireless” click “Network” icon. The following window will pop up.
Digital Video Recorder User Manual Step 2: Enter into Network interface and then click “Ethernet Connected” to check the internet connection of Apple PC. Step 3: After acquiring the IP address, Subnet Mask and so on, please enter into the DVR’s Main Menu Setup Network interface to manually input IP address, Subnet Mask and Gateway according to the configuration of PC. The network segment should be the same as the PC. If using DHCP, please enable DHCP in the DVR and router.
Digital Video Recorder User Manual Step 5: Click icon and then select the Active X control, the welcome interface will be shown. Click “Continue” ”Install” button,the following window will pop up: Input the name and password of Apple PC and then click “OK” to install this Active X control. Step 6: After finishing installing the Active X control, please quit from the Safari browser. Right click icon on the desktop and then select “Quit” button to quit the browser. Then restart Safari browser.
Digital Video Recorder User Manual 7.
Digital Video Recorder User Manual Note: click button to record manual and the record file will be saved in user’s PC. Screen display mode: Click the icon beside the screen display mode, channel select dialog will appear as below: Take 8-channel DVR for example: user can tick off channels form 1-ch to 8-ch at random to display the live pictures, 6 channels can be selected at most. Then click OK button to confirm the setting.
Digital Video Recorder User Manual Buttons definition: Buttons Description means the dome rotate up. means the dome rotate up left. means the dome rotate up right means the dome rotate down. means the dome rotate left down. means the dome rotate right down. means the dome rotate left. means the dome rotate right. means the dome stop rotating. Drag the scroll bar to adjust rotating speed of the dome. 'Iris' button. Click dome.
Digital Video Recorder User Manual Click the right mouse on the live interface, a pull-down menu will appear as below Fig 7-4 right key sub menu Stream: this DVR supports master stream and sub stream. Master stream has higher frame rate, max 25FPS(PAL)/30 FPS(NTSC)for every channel, but it needs higher network bandwidth simultaneously; Sub-stream has low frame rate, max 6FPS (PAL)/7FPS(NTSC) for every channel, it requires low network bandwidth.
Digital Video Recorder User Manual 7.4 Remote playback & backup 7.4.1 Remote playback Click button to enter into record playback interface, refer to Fig 7-5: Select the record date and channels; double-click the file name in the record file list box, user can play that file and preview the picture. Fig 7-5 Play record file interface This DVR supports remote time search, event search and file management.
Digital Video Recorder User Manual Step1: Enter into Search time search; refer to Fig 7-6: Fig 7-6 time search interface Step2: click “Search” button.
Digital Video Recorder User Manual Fig 7-7 Time search playback By Event Search: Step1: Enter into Search event search; refer to Fig 7-8: 65
Digital Video Recorder User Manual Fig 7-8 event search interface Step2: click the highlight date and select record channels and then tick off the event type: motion and sensor, click “search” button Step3: the events will be display in the event list box.
Digital Video Recorder User Manual Step1: Enter into Search file management; refer to Fig 7-9: Fig 7-9 file management interface Lock: select certain file item in the file list box, click “Lock” button to lock this file that ca not be deleted or overlaid Unlock: select a locked file, click “unlock” button to unlock this file Delete: select an unlock file, click “delete” button to delete this file from file list 67
Digital Video Recorder User Manual 7.4.2 Remote backup Click Backup button to enter into backup interface, refers to Fig 7-10: Fig 7-10 remote backup interface Step1: select channels, set the start and end time and then click “search’ button to display the file information in the file list box. Step2: select backup files, click “browse” button to set the save path, and then click “backup” button to start backup. The backup files will be saved on user’s PC.
Digital Video Recorder User Manual 7.5 Remote System Configuration User can remote setup the parameters of the device. Functions of remote configurations include: basic configuration, live configuration, record configuration, schedule configuration, alarm configuration, network configuration, PTZ configuration and user configuration. User should firstly select an item in the menu list on the left, and then setup the relative parameters.
Digital Video Recorder User Manual 8 Mobile Surveillance This DVR supports mobile surveillance by Iphone, Gphone or smart phones with Windows mobile and symbian OS. At the same time, it supports 3G network. We tested Dopod D600 (WM5) and Dopod S1 (WM6), which work fine with the DVR. It wants to make mobile surveillance, need first enable network service on the DVR, and refer to Chapter 4.6 Network configuration. The below is the use instructions on mobile client end for two OS. 8.
Digital Video Recorder User Manual Step3:Click “Yes” to start downloading and installing: Step4:PCam will be opened automatically after installed Step5:Input the server’s address, ID and password respectively in the columns of “Server”, “User” and “Password”, and click “Go” to log on the server. It will show the picture if access successfully. Step6:Camera 1 is the default channel after login.
Digital Video Recorder User Manual Notice: User name and password here are the same with that used on the DVR. The default is admin and 123456. 8.2 By Phones with Symbian Please use the smart phones with symbian version supported by this unit. Symbian S40 Symbian UIQ Symbian S80 Symbian S60 rd Symbian S60 3 Edition-Symbian OS v9.1 rd Symbian S60 3 Edition with FP 1-Symbian OS v9.2 rd Symbian S60 3 Edition with FP2-Symbian OS v9.3 th Symbian S60 5 Edition-Symbian OS v9.4 Symbian S60 5.
Digital Video Recorder User Manual Step4:A security windows will pop up after downloading and ask if install the package. Click YES to install. Step5:A Scam shortcut icon appears on the system menu after finished. Step6:Run Scam program. It will enter a function interface. Live view: to do mobile live view Image view: to check the pictures snapped in live view System setting: Login setting and Alarm setting.
Digital Video Recorder User Manual 8.3 The operation method for iPhone mobile clients 1. Install through iphone. Step 1. Open App Store function of iphone Step 2.
Digital Video Recorder User Manual Step 3: Click SuperCam, enter into “introduce” interface and then click “FREE”, it will change into “INSTALL” Step 4: Input iTunes Store password and then click “OK”, the software will be installed automatically. Note: if it was the first time for user to operate, please enter user ID; if there is no Store account, user needs to apply one.
Digital Video Recorder User Manual 2.
Digital Video Recorder User Manual Step 5: Input apple ID and password, then click “acquire” Step 6: Tick off “synchronously apply program” and “SuperCam”, and then click “apply” button Operation Instruction for iphone 1. Login interface Enter server’s IP address (or domain name), user name and password Click “Remember server” to save the setting; click button can quick input saved server address, user name and password.
Digital Video Recorder User Manual 2. Main Interface 【Playback】 【Log】 log record 【Live】 live view 【Information】 【Logoff】 3.
Digital Video Recorder User Manual Mark 1 Group H-Reverse Current viewing channel Mark 2 Channel status Switch channels PTZ, click to switch to Fig 2 interface Snap picture Record Close the video of the current channel Live audio Switch to the single image Switch to four images Upward rotates the PTZ Downward rotates the PTZ Leftward rotates the PTZ Rightward rotates the PTZ Stop rotating the PTZ Zoom In/Focus In/Iris Add Zoom Out/Focus Out/Iris Sub Preset elect the preset point Set th
Digital Video Recorder User Manual 4. Image view interface 5. Record Playback interface Click the record file to playback.
Digital Video Recorder User Manual 6. Server list Interface 7.
Digital Video Recorder User Manual Main parameters for mobile phone video configuration Record file clip size: Single video size.
Digital Video Recorder User Manual 8.
Digital Video Recorder User Manual Step 5: user can view the download and install process in notifications; finished download, the software will install automatically. Login Enter into server’s IP address (or domain name), user’s ID and password. Click “Remember server” to save the setting; click button can quick input saved server address, user name and password.
Digital Video Recorder User Manual 【Playback】 playback record file 【Image】 【Log】 log record 【Live】 live view 【Server List】 device list software setting 【Settings】 【Information】 device information view 【Help】 logoff and return to login interface 【Logoff】 image view software help center Live view (Fig 1) (Fig 2) 85
Digital Video Recorder User Manual Mark 1 Current viewing channel Channel status Switch channels PTZ, click to switch to Fig 2 interface Snap record talk Live audio Full screen Return Upward rotates the PTZ Downward rotates the PTZ Leftward rotates the PTZ Rightward rotates the PTZ Stop rotates the PTZ Zoom In/Focus In/Iris Add Zoom Out/Focus Out/Iris Sub Group Mark 2 Preset Select the preset point Set the cruise line Image view Previous Next Zoom out Delete Zoom out Return to ma
Digital Video Recorder User Manual Record playback Play/pause Full screen stop Return to record file interface (Fig 3) (Fig 3) (Fig 4) Click the record file (Fig 3) to playback (Fig 4) Server list 87
Digital Video Recorder User Manual Config interface Alarm setting Tick off Sound Alarm ,when Video Loss/Sensor/Motion happen,trigger sound alarm; Tick off Vibrate Alarm, when Video Loss/Sensor/Motion happen,trigger vibrate alarm Storage setting Path Reserved disk space Video clip size Remove all recorder files before User can setup the relevant parameters of mobile video. This function can be valid only insert SD card. Save path for mobile video files, the default catalog is /SD Card/.
Digital Video Recorder User Manual Information view 8.5 Installation and Operation methods for blackberry mobile phone Client 8.5.1 Installation instruction for Blackberry mobile phone client 1. Open the browser of BlackBerry phone and enter sever address 2. Click “SuperCam” to link 3. Click “Download” button on the popup interface and the download progress will be shown.
Digital Video Recorder User Manual 4. Finished downloading, the software will be installed automatically. Note: If the software fails to download, please check in accordance with the following steps: 1. Check whether the network of mobile phone is normal or not 2. Check whether DVR server connect network normally or not 3. Modify the option of Browser Configuration. 1) Enter into Menu->Option->Browser Configuration; configure referring to the following figure.
Digital Video Recorder User Manual 2) Enter into Menu->Option->Cache Operations, clear up browser cache. Note:When user used the SuperCam software in mobile phone with touch screen, there will be compatible problem. Solution: Enter into Options Menu->Advance options->Applications->SuperCam and click “Disable Compatibility” button. This problem will be solved.
Digital Video Recorder User Manual 8.5.2 Operation method for Black berry mobile phone client 1. Login Enter server’s IP address (or domain name), user’s ID and password. Click “Remember server” to save the setting; click button can quick input saved server address, user name and password. 2.
Digital Video Recorder User Manual 【Playback】 【Log】 【Information】 3.
Digital Video Recorder User Manual Note: User can click Return button on the Blackberry phone to return the previous interface. Mark 1 Current viewing channel Mark 2 Channel status Switch channels PTZ, click to switch to Fig 2 interface Snap Full screen Background Preset 4.
Digital Video Recorder User Manual 5. Software configuration 6.
Digital Video Recorder User Manual Appendix A FAQ Q1. Why the DVR cannot start after connected to the power? a. The adapter has been damaged. Please change an adapter b. The power of the adapter is not enough. Please remove the HDD to check c. Hardware problem Q2. There is not menu output or only has live image display a. Check up whether other devices can display menu or long press ESC key to wait for login dialog box to appear. Q3. The indicator of the DVR lights, but no output. Why? a.
Digital Video Recorder User Manual a. Don't format HDD. Please format it manually first. b. Don't enable record function or incorrect setup. Please refer to Chapter 5 Record search & playback and backup. c. HDD is full and not enables recycle function. Please refer to 4.3 Record configuration. Chang a new HDD or enable recycle. d. The HDD is damaged. Change a new one. Q7. Cannot use mouse. a. wait 1-2 minutes after mouse connected. b. Not detected. Plug/unplug several times. c. The mouse is incompatible.
Digital Video Recorder User Manual Fig 8-1 Fig 8-2 Q9: How to deal with when DVR starts, it displays “please wait?”all the time First possible reason: hard-disk cable and data cable are not well connected.
Digital Video Recorder User Manual numbers, and then the small keyboard will appear. Please select number or letter to input (the initial password is 123456), or you can use the digital keys in the front panel, or the digital keys on the remote controller.
Digital Video Recorder User Manual Account on or off. Cancel Use User Account Control (UAC) to help protect your computer. b. Right click IE browser (refer to Fig 13-2), select Run as administrator to run browser.
Digital Video Recorder User Manual Appendix B Calculate Recording Capacity Users can calculate the size of hard disk according to the saving time and DVR recording settings. The DVR uses fixed video bit rate. The below are the details at different settings.
Digital Video Recorder User Manual Appendix C Compatible Devices 1. Compatible USB drive after test. Brand SSK Netac Kingston Aigo Smatter vider SanDisk Capacity 512MB, 1G, 2GB 4GB 2GB 2GB 1GB 4GB Tab C.1 Compatible USB drive 2. Compatible HDD list Brand Seagate Barracuda LP ST3200542AS Seagate Barracuda 7200.11 ST31500341AS Seagate SV35.3 ST31000340SV Seagate Pipeline HD.2 Seagate Barracuda 7200.10 Seagate Barracuda 7200.10 ST3250310AS Seagate Barracuda 7200.11 ST3160813AS Seagate Barracuda 7200.
Digital Video Recorder User Manual Appendix D 4-CH Specifications Compression format Standard H.264 Baseline Video output Composite:1.0V p-p/75Ω BNC×2 , VGAX1 Video input Composite:1.
Digital Video Recorder User Manual Appendix E 8-CH Specifications Compression format Standard H.264 Baseline Video output Composite:1.0V p-p/75Ω BNC×2 , VGAX1 Video input Composite:1.
Digital Video Recorder User Manual Appendix F 16-CH Specifications Compression format Video output Standard H.264 Baseline Video input VGA Resolution Record Resolution Composite:1.