Owner's manual

Digital Video Recorder User Manual
20
Note: Click Camera Name to see a soft keyboard. User can self-define the camera name. Click Shift button to input
Capital letters; click Shift button again to input Chinese characters.
Step2: tick off camera name and click “setting” button to display a window as Fig 4-7:
Fig 4-6 live configurationlive Fig 4-7 live-color adjustment
Step3: in this interface, user can adjust brightness, hue, saturation and contrast in live; click “default” button to resort
default setting, click “OK” button to save the setting.
Step4: user can setup all channels with same parameters, please tick off “all” and then do relevant setup.
Step5: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit
current interface.
4.2.2 Main monitor
Step1: enter into system configurationlive configurationmain monitor; refer to Fig 4-8:
Step2: select split mode: 1×1、2×2、2×3、3×3 and channel
Step3: dwell time: the time interval for a certain dwell picture display switching to next dwell picture display
Step4: selected the split mode, then setup current picture group. Click button to setup the previous channel groups
of dwell picture, click button to set the latter channel groups of dwell picture.