Owner's manual

Digital Video Recorder User Manual

② Advance

Step1: enter into system configuration P.T.Z configurationadvance; refer to Fig 4-37:

Step2: in the Advance interface, after clicking preset “Setting” button, a dialog box will pop-up as Fig 4-38:

Fig 4-37 P.T.Z configuration-advance Fig 4-38 advance-preset setting

a. in the preset set interface, click Setting button to see a window as Fig 3-39:

Fig 4-39 preset set-setting

b. user can control the dome rotates up, up left, down, right down, left , left down, right and up right and stop rotating; adjust the rotate

speed and the value of zoom, focus and iris of the dome;

c. select the serial number of the preset point. Click button to enable the PTZ wiper and click button to enable the PTZ

light.

Note: PTZ must support wiper and light, these two functional buttons can take effect. At the same time these two buttons

are just available when selecting PELCOP or PELCOD.