Contents Chapter 1: DVR Features ........................................................................................................................................ 2 DVR Feature ...................................................................................................................................................... 2 Chapter 2: Overview ................................................................................................................................................ 2 2.
User Manual 6.3 Stop Recording ........................................................................................................................................... 21 6.4 Estimated Recording Length ...................................................................................................................... 21 Chapter 7: Playback...............................................................................................................................................
User Manual Chapter 1: DVR Features DVR Feature MPEG-4 compression 4-Channel: 4 BNC Camera Inputs - 2 BNC Video Outputs 9-Channel: 9 BNC Camera Inputs - 1 BNC Video Output 4-Channel: 2 Audio Inputs - 2 Audio Outputs 9-Channel: 1 Audio Input -1 Audio Output System Format : NTSC /PAL Motion Detection with Sensitivity and Area Settings Time Schedule, Alarm and Motion Triggered Recording Modes Hard Disk Support up to 500GB Supports PTZ Control via RS-485 Port View and Operate over Network (Broa
User Manual 11. STOP 16. MENU/ESC/LEFT 12. REC 17. UP 13. HDD LED 18. SEL/EDIT/RIGHT 14. IR Receiver 19. DOWN 15. Power LED 20. PTZ: Enter PTZ mode 2.1.2 9-ch DVR front panel 1. Removable HDD Tray 11. STOP 2. SEARCH 12. REC: Record 3. MUTE: Turn on/off audio output 13. HDD LED 4. CH-: View previous channel 14. IR receiver 5. CH+: View next channel 15. Power LED 6. ALL: View all channels 16. MENU/ESC/LEFT 7. REW: Rewind play/Focus 17. UP 8. PAUSE: Pause/Auto sequence display 18.
1. Audio inputs 7. Audio outputs 2. Video outputs 8. CH1-CH4：Video input1- video input4 3. VGA output (Optional) 9. RS-485/SENSOR/ALARM 4. USB port 10. DC Power Input Jack 5. POWER Switch 11. Grounding 6. LAN: Ethernet port 2.2.2 9-ch DVR rear panel 1. USB port 7. POWER Switch 2. Audio output 8. LAN: Ethernet port 3. Audio input 9. RS-485/Sensor/Alarm 4. Video output 10. DC Power input jack 5. CH1-CH9：Video input1- video input9 11. Grounding 6. VGA output (Optional) 2.
User Manual Chapter 3: Installation 3.1 Install Hard Disk NOTICE: Don’t take out HDD when DVR is running. (1) Take out the Hard Disk Drive tray carefully. (2) Connect the power cord and data cable to hard disk carefully. (3) Put the Hard Disk Drive tray back into the DVR and then lock the HDD tray. 3.2 Connecting Camera and Monitor There are 4/9 camera inputs and 2/1 Monitor outputs with BNC connectors (Refer to 2.2 Rear Panel). 3.3 VGA Output (optional) There is 1 CRT or LCD monitor output with VGA port.
User Manual 4.3 Format Hard Drive When the DVR detects a new hard drive, you will be prompted to format the hard drive before using the DVR. CHECKING HDD…… MASTER [WDC WD3200AAJB-00T]-NEW-DVR FORMAT HDD CONFIRM Press [SEL] to format or press [MENU] to cancel. (SELECT) FORMAT / (MENU) CANCEL? Chapter 5: DVR Menu System 5.
User Manual 5.3 Camera Setup Camera Setup allows you to turn cameras on or 1 ON 2 ON CAMERA SETUP off. Press [▲, ▼, ◄◄ and ►►] buttons to select a channel and then press [SEL] to modify the setting 3 ON 4 ( )MOVE ON ON or OFF. (SEL) SELECT (MENU)EXIT Note：If a camera channel is set to OFF, it will not be recorded (Refer to 6.4 Record Setup) 5.4 Record Setup Record Setup allows you to set up recording 1 ON 2 RECORD NOCAM SETUP channels.
User Manual 5.6 Video Quality Video Quality has 4 different settings: MAIN MENU CAMERA SETUP RECORD SETUP RECORD FRAMERATE VIDEO QUALITY RECORD SCHEDULE SENSOR SETUP HARD DRIVE SETUP MISCELLANEOUS SETUP NETWORK SETUP LANGUAGE VIDEO BACKUP RESET MENU ( )MOVE Highest, High, Normal and Low. The higher the video quality, the better NORMAL quality of images, however higher quality images require more hard drive space. ENGLISH Press [SEL] to change the quality setting. (SEL)SELECT (MENU)EXIT 5.
User Manual 5.8 Sensor Setup Sensored Record Time indicates how long the recording time is when the motion or sensor is triggered. Alarm On Time indicates whether the buzzer will sound when motion is detected. SENSOR SETUP SENSORED RECORD TIME ALARM ON TIME 30 OFF H/W SENSOR SETUP MOTION DETECTOR SETUP ( )MOVE (SEL)SELECT (MENU)EXIT CONT: Continuous alarm until any key is pressed. OFF: No alarm Note: Sensored Record Time and Alarm On Time are measured in seconds 5.
User Manual Area Selection: Press [▲, ▼, ◄◄ or ►►] button to select a block, and press [SEL] button to set the block to detect motion. The area is detectable when it is clear, the area is not detectable when it is covert by shadow. Press “Stop” button to disable all areas, press “Quad” or “ALL” button to enable all areas. 5.
User Manual Enter the current password first, and then CURRENT PASSWORD [- - - - -] NEW [- - - - -] PASSWORD CONFIRM enter six characters as your new password, repeat the new password to confirm. If you forget your password, please contact [- - - - -] PASSWORD technical support for assistance. 5.13 Miscellaneous Setup - Set Time SET TIME The system date and time format is YYYY/MM/DD and HH:MM: SS.
User Manual Note: For 4-ch DVR, there are 2 audio inputs. For 9-ch DVR, there is only 1 audio input. 5.16 Miscellaneous Setup - PTZ Setup SPEED: Set the baud rate (2400,4800，9600，19200， PTZ SETUP 38400) to match your speed dome. SPEED [4800] PROTOCOL: Supports “PELCO-D” and PROTOCOL [PELCO-D] “PELCO-P”. Select the protocol according to your CAMERA- [ 1 ] ID [ 1 ] speed dome’s protocol.
User Manual 5.18 Miscellaneous Setup - Password Enable The password will be required to control the MISCELLANEOUS SETUP DVR when this option is set to “ON”, and the CHANGE PASSWORD SET TIME HIDDEN CHANNEL AUDIO PORT SETUP PTZ SETUP IMAGE PARAMETERS PASSWORD ENABLE KEYPAD TONES SEQ.DWELL TIME VGA SETUP ( )MOVE [ 1 ] [ CH3 ] [ OFF ] [ ON ] [ 05 ] [1024*768 75HZ] password is not required when this option is set to “OFF”. (SEL)SELECT (MENU)EXIT 5.
User Manual 5.21 Miscellaneous Setup - VGA Setup Select a VGA resolution to match your CRT or MISCELLANEOUS SETUP LCD monitor. CHANGE PASSWORD SET TIME HIDDEN CHANNEL AUDIO PORT SETUP PTZ SETUP IMAGE PARAMETERS PASSWORD ENABLE KEYPAD TONES SEQ. DWELL TIME VGA SETUP ( )MOVE [ 4 NOTE: VGA video output is an optional ] function and may not be available on all models. [ CH4 ] [ OFF ] [ ON ] [ 05 ] [1024*768 75HZ] (SEL)SELECT (MENU)EXIT 5.
User Manual NETWORK MAC ADDRESS IP ALLOCATION IP ADDRESS SUBNET MASK GATEWAY DNS1 ADDRESS DNS2 ADDRESS HTTP PORT USER SETUP DDNS SETUP SETUP <00:11:22:33:44:55> [STATIC] [192.168.1.100] [255.255.255.0] [192.168.1.1] [0.0.0.0] [0.0.0.0] [ 80] (HTTP PORT) 80, 1024-49151 ( )MOVE IP Address: In a local network, the IP address is a unique designated address for your DVR recognized by your router. Ensure this number is within the range usable by your modem/router.
User Manual NETWORK MAC ADDRESS IP ALLOCATION IP ADDRESS SUBNET MASK GATEWAY DNS1 ADDRESS DNS2 ADDRESS HTTP PORT USER SETUP DDNS SETUP SETUP <00:11:22:33:44:55> [STATIC] [192.168.1.100] [255.255.255.0] [192.168.1.1] [0.0.0.0] [0.0.0.0] [ 80] HTTP PORT: This port number is used to communicate with PC Client.
User Manual You need to register a www.dyndns.com to get a free account .After registration，you will have a username and password. You can also register your domain name on the website. Please refer to Chapter 5 “Network Setup” for more details. There you will learn how to input the Dyndns username，password，and domain name. You can log in from anywhere by using Internet Explorer and entering your DVR’s domain name. 5.
User Manual Move the cursor to “VIEW EVENTS”, press EVENT LIST [SEL] to enter event list. Press [▲] or [▼] button to 00003 T 2008/08/22 19:42:25 move the cursor, and then press [SEL] to select the 00002 T 2008/08/22 17:30:19 event you like to backup and return to previous 00001 T 2008/08/22 16:20:22 menu. 00000 T 2008/08/21 17:12:43 VIDEO The DVR system already indicated the start & BACKUP end time of the recording event.
User Manual VIDEO BACKUP VIEW EVENTS START: 2008/08/22 16:20:22 END: 2008/08/22 16:48:28 SIZE: [197] MB FILE NAME: [VID000.MCG] BACKUP TO CD/DVD BACKUP TO USB DEVICE ( )MOVE Insert your USB memory stick device into DVR’s USB port. Move the cursor to “BACKUP TO USB DEVICE”, press [SEL] button. (SEL)SELECT (MENU)EXIT BACKUP TO USB DEVICE DVR will check your USB device as left picture showed and then start to copy the backup file.
User Manual Chapter 6: Record 6.1 Start Recording Press [●] record button to start recording according to the record schedule you have set. System will display some information on screen. [●]: the red pot next to the channel name indicates that the channel is being recorded. [A-REC]: indicates the current record schedule is set to NORMAL-RECORD mode. [S-REC]: indicates the current record schedule is set to SENSOR-RECORD mode. [N-REC]: indicates the current record schedule is set to NO-RECORD mode.
User Manual 6.3 Stop Recording Press [■] stop button will stop recording. If password protection function is enabled, system will prompt you to input password. Only correct password can stop recording process. 6.
User Manual Chapter 8: USB Progamming 8.1 Driver Installation: (1) (2) (3) (4) (5) Insert driver CD in your CD-ROM Drive. Open CD directory. Double click on the install applications. Run “Install” program. Follow the setup wizard to finish the installation. 8.2 Program Interface – Button Functions: 1 2 3 4 5 6 7 8 10 11 12 13 14 15 16 17 18 1.PTZ Control 2.Zoom in，Zoom Out 3.HDD Play Mode 4.File Play Mode 5.Net Play Mode 6.Event List 7.Change DVR settings 8.Remote DVR Control 9.
User Manual 8.3 Program Running 8.3.1 HDD play mode System will detect the HDD automatically when you connect the USB cable to your PC. An USB icon“ ” will appear in the system tray (right bottom corner of the screen). After you’ve seen the USB icon, double click “ ” icon on your desktop to run the program. Note: if you do not follow above steps, the program will fail to detect HDD Press “ ” to open the video event lists. Press “ ” to configure the program local settings.
User Manual Press “ ” to play video. 8.3.2 FILE play mode Press “ ” to open a folder and select the file you want play. Double click the file. Note : This function is only used to play the backup files on USB or CD/DVD device. 8.3.3 NET play mode This mode allows you to remote control your DVR via Internet or Intranet. Press “ ” to pop up the login window. Fill in Host Name, Host Port, User Name and Password of the DVR that you want remotely access and then press Login to enter the main page.
User Manual Chapter 9: Specification 4 / 9-Channel DVR Items Descriptions Video Standard NTSC/PAL Video Input/Output 4 Channels/2 Channels，9 Channels/1 Channel Audio Input/Output 2 Channels/2 Channels，1 Channel/1 Channel Monitoring Recording Resolution NTSC:720X480@30fps(Each Ch) PAL:720X576@25fps(Each Ch) Features Full-D1，1-CH/4-CH/9-CH Display Resolution NTSC:720X240@60fps(4/9Ch.Total) PAL:720X288@50fps(4/9Ch.
User Manual Chapter 10: Appendix 10.1 System connection diagram Sensor Alarm PC(Optional) DVR Camera USB VCR TV or Monitor LAN(RJ-45)Port on DVR 10.
User Manual China prints 2008.6 V1.0 The material in this document is the intellectual property of our department . No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without our department prior written permission. Our products are under continual improvement and we reserve the right to make changes without noti ce. But no guarantee is given as to the correctness of its contents.
