User Manual LTD9116MKIT User Manual Contact US: LTS Products LT Security, Inc. 19455 E. Walnut Drive North Walnut, CA 91789 Website: http://www.LTSecurityinc.com Tech Support: Toll Free：888-587-5871 Email：Support@ltsecurityinc.
User Manual Contents Chapter 1: DVR Features ........................................................................................................................................3 DVR Feature ......................................................................................................................................................3 Chapter 2: Overview ................................................................................................................................................
User Manual 6.2 Audio Recording ........................................................................................................................................19 6.3 Stop Recording ...........................................................................................................................................20 6.4 Estimated Recording Length ......................................................................................................................20 Chapter 7: Playback.........
User Manual Chapter 1: DVR Features DVR Feature MPEG-4 compression 9 BNC Camera Inputs - 1 BNC Video Output 1 Audio Input -1 Audio Output System Format : NTSC /PAL Motion Detection with Sensitivity and Area Settings Time Schedule, Alarm and Motion Triggered Recording Modes Hard Disk Support up to 500GB Supports PTZ Control via RS-485 Port View and Operate over Network (Broadband Connection Required) Built-in USB 2.0 Port for Backup to Computer VGA Output Chapter 2: Overview 2.
User Manual 2.2 Rear Panel 1. Audio Input 2. Video output 3. CH1-CH9:video input 1- video input 9 4. VGA output 5. USB port 6. LAN: Ethernet port 7. Audio output 8.RS-485/Sensor/Alarm 9.DC Power Input Jack 10.Power switch 11. Grounding 2.
User Manual Chapter 3: Installation 3.1 Install Hard Disk NOTICE: Don’t take out HDD when DVR is running. (1) Remove the screws around the top cover. (2) Remove the top cover carefully. (3) Connect the power cord and data cable to hard disk carefully. (4) Use the provided screws to fix hard disk on the rack inside and then replace the top cover of the case. 3.2 Connecting Camera and Monitor There are 9 camera inputs and 1 Monitor output with BNC connectors (Refer to 2.2 Rear Panel). 3.
User Manual 4.2 Detecting Installed Hard Drive DVR will detect the installed hard drive and display the hard drive information. CHECKING HDD…… MASTER [WDC WD3200AAJB-00T] SLAVE…… 4.3 Format Hard Drive CHECKING HDD…… MASTER [WDC WD3200AAJB-00T]-NEW-DVR FORMAT HDD CONFIRM (SELECT) FORMAT / (MENU) CANCEL? When the DVR detects a new hard drive, you will be prompted to format the hard drive before using the DVR. Press [SEL] to format or press [MENU] to cancel. Chapter 5: DVR Menu System 5.
User Manual 5.2 Menu Overview Menu Directory Camera Setup Record Setup Record Frame rate Video Quality Record Schedule Sensor Setup Main Menu Hard Drive Setup Miscellaneous Setup Network Setup Language Reset Menu Change Password Set Time Hidden Channel Audio Port Setup PTZ Setup Image Parameters Password Enable Keypad Tones Seq.Dwell Time VGA Setup 5.
User Manual 5.5 Record Frame Rate 1 5 FPS 2 5 FPS 3 5 FPS RECORD FRAMERATE TOTAL 45FPS 4 5 FPS 5 5 FPS 6 5 7 5 FPS 8 5 FPSN 9 5 FPS ( （SEL）+ )MOVE ( □ )- FPS (MENU) EXIT The total frame rate is 50fps (PAL) or 60fps (NTSC). You can set the frame rate for the channel which you selecte to record. If the sum of the frame rate you select for all cameras is more than 50fps (PAL)/60fps (NTSC), the DVR will automatically adjust the largest frame rate value to a smaller value.
User Manual NO-RECORD [ white]: DVR will not record during the time. NORMAL-RECORD [ red]: DVR will record continuously. SENSOR-RECORD [S]: DVR will record when sensor or motion is triggered. NOTE: In order to activate the record schedule, press the [ ] record button when viewing the cameras.
User Manual 5.10 Motion Detector Setup This section allows you to set up motion detection options for each camera. MOTION CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 ( DETECTOR ON ON ON ON ON ON ON ON ON )MOVE LEVEL1 LEVEL2 LEVEL2 LEVEL2 LEVEL2 LEVEL2 LEVEL2 LEVEL2 LEVEL2 SETUP AREA AREA AREA AREA AREA AREA AREA AREA AREA MOTION DETECTOR SETUP: ON/OFF: Enable or disable motion detection recording. LEVEL: Sensitivity for motion detection.
User Manual HDD FORMAT: Will erase all video and data on the installed hard drive and make it readable by the DVR Note: You will be prompted for the password when formatting a hard drive. The default password is “111111” 5.12 Miscellaneous Setup - Change Password MISCELLANEOUS SETUP CHANGE PASSWORD SET TIME HIDDEN CHANNEL AUDIO PORT SETUP PTZ SETUP IMAGE PARAMETERS PASSWORD ENABLE KEYPAD TONES SEQ.
User Manual 5.14 Miscellaneous Setup - Hidden Channel MISCELLANEOUS SETUP CHANGE PASSWORD SET TIME HIDDEN CHANNEL AUDIO PORT SETUP PTZ SETUP IMAGE PARAMETERS PASSWORD ENABLE KEYPAD TONES SEQ.DWELL TIME VGA SETUP ( )MOVE [ 4 ] [ CH4 ] [ OFF ] [ ON ] [OFF ] 1024*768 60HZ The system provides a function to hide a channel in monitoring mode. The selected channel can still be recorded while it’s hidden; the hidden picture is viewable during playing back. Press [SEL] to select a channel to hide.
User Manual 5.17 Miscellaneous Setup - Image Parameters You can adjust the image parameters MISCELLANEOUS SETUP CHANGE PASSWORD SET TIME HIDDEN CHANNEL AUDIO PORT SETUP PTZ SETUP IMAGE PARAMETERS PASSWORD ENABLE KEYPAD TONES SEQ.DWELL TIME VGA SETUP ( )MOVE according to your needs. [ 1 Move the cursor to this selection and ] [ CH4 ] [ OFF ] [ ON ] [OFF ] 1024*768 75HZ (SEL)SELECT (MENU)EXIT press[◄◄] or [►►] button to select a channel you want to adjust, then press [SEL] button to edit parameters.
User Manual 5.19 Miscellaneous Setup - Keypad Tones MISCELLANEOUS SETUP CHANGE PASSWORD SET TIME HIDDEN CHANNEL AUDIO PORT SETUP PTZ SETUP IMAGE PARAMETERS PASSWORD ENABLE KEYPAD TONES SEQ.DWELL TIME VGA SETUP ( )MOVE This function allows you to enable /disable buzzer sound when pressing a [ 4 ] [ CH4 ] [ OFF ] [ ON ] [OFF ] 1024*768 75HZ (SEL)SELECT (MENU)EXIT button. Press [SEL] to select ON or OFF. 5.20 Miscellaneous Setup – SEQ.
User Manual NETWORK MAC ADDRESS IP ALLOCATION IP ADDRESS SUBNET MASK GATEWAY DNS1 ADDRESS DNS2 ADDRESS HTTP PORT USER SETUP DDNS SETUP SETUP <00:11:22:33:44:55> [STATIC] [192.168.1.100] [255.255.255.0] [192.168.1.1] [0.0.0.0] [0.0.0.0] [ 80] (HTTP PORT) 80, 1024-49151 ( )MOVE (SEL)SELECT (MENU)EXIT MAC ADDRESS: In a local area network(LAN)， the MAC (Media Access Control) address is your computer’s unique hardware identity code (On an Ethernet LAN，it is the same as your Ethernet address).
User Manual NETWORK SETUP GATEWAY: Set this number to the gateway set by your modem/router. <00:11:22:33:44:55> [STATIC] [192.168.1.100] [255.255.255.0] [192.168.1.1] [0.0.0.0] [0.0.0.0] [ 80] MAC ADDRESS IP ALLOCATION IP ADDRESS SUBNET MASK GATEWAY DNS1 ADDRESS DNS2 ADDRESS HTTP PORT USER SETUP DDNS SETUP (HTTP PORT) 80, 1024-49151 ( )MOVE (SEL)SELECT (MENU)EXIT NOTE: To adjust the IP ADDRESS，SUBNET MASK and GATEWAY value, only when the [STATIC] mode is being selected.
User Manual DDNS SETUP DDNS PROVIDER DDNS USER NAME DDNS PASSWORD DOMAIN NAME ( )MOVE [WWW.DynDNS.com ] [ ] [ ] [ ] DDNS SETUP ： If you require an external service to maintain a dynamic IP address enter the user information here. (SEL)SELECT (MENU)EXIT LAN-DVR Connection See the diagram below for steps to connect your DVR to a local area network or the internet. For remote monitoring from your computer，you must have a LAN connection available or broadband Internet access. You need to register a www.
User Manual 5.23 Language MAIN MENU CAMERA SETUP RECORD SETUP RECORD FRAMERATE VIDEO QUALITY RECORD SCHEDULE SENSOR SETUP HARD DRIVE SETUP MISCELLANEOUS SETUP NETWORK SETUP LANGUAGE RESET MENU ( )MOVE You can change the OSD language from the default English to other languages. NORMAL E NGLISH (SEL)SELECT (MENU)EXIT 5.24 Reset Menu If you select this item, the system will restore all your settings to factory default values. You need to enter your password to reset the menu. 5.
User Manual Chapter 6: Record 6.1 Start Recording Press [●] record button to start recording according to the record schedule you have set. System will display some information on screen. [●]: the red pot next to the channel name indicates that the channel is being recorded. [A-REC]: indicates the current record schedule is set to NORMAL-RECORD mode. [S-REC]: indicates the current record schedule is set to SENSOR-RECORD mode. [N-REC]: indicates the current record schedule is set to NO-RECORD mode.
User Manual 6.3 Stop Recording Press [■] stop button will stop recording. If password protection function is enabled, system will prompt you to input password. Only correct password can stop recording process. 6.
User Manual SEARCH VIDEO DISK:MASTER SLAVE [NONE] 08/09/19 11:16:31 - 08/09/19 15:05:48 TYPE:EVENT TIME PLAY:00006 T 2008/09/19 ( ( )MOVE 15:07:40 (SEL)SELECT )PLAY (MENU)PREV MENU Another way to search video is directly input time period. Press the [MENU] button then use [◄◄] or [►►] button to select the TIME search mode. Use [SEL] button to edit time value, press [►] to play the video.
User Manual 1.PTZ Control 12. Time Search 2.Zoom in，Zoom Out 13.Back One Frame 3.HDD Play Mode 14.Record 4.File Play Mode 15.Stop 5.Net Play Mode 16. Pause 6.Event List 17. Play 7.Control Panel 18.Fast Forward 8.Remote DVR Control 19.Forward One Frame 9.Change Storage Device 20.Playback Slider 10.Capture Image 21.Audio Slider 11. Convert Streams to AVI file 8.3 Program Running 8.3.1 HDD play mode System will detect the HDD automatically when you connect the USB cable to your PC.
User Manual Press “ Press “ ” to configure the program local settings ” to play video. 8.3.
User Manual Press “ ” to open a folder and select the file you want play. Double click the file. 8.3.3 NET play mode: This mode allows you to remote control your DVR via Internet or Intranet. Press “ ” to pop up the login window. Fill in Host Name, Host Port, User Name and Password of the DVR that you want remotely access and then press Login to enter the main page.
User Manual Chapter 9: Specification 9.1 DVR Items Descriptions Video Standard NTSC, PAL Video Input/Output 9Channels BNC/1 Channel BNC Audio Input/Output 1 Channel/1 Channel Monitoring Recording Resolution NTSC:720X480@30fps (Each Ch) PAL:720X576@25fps (Each Ch) Features Full-D1，1-CH/4-CH/9-CH Display Resolution NTSC:720X240@60fps (9Ch.Total) PAL:720X288@50fps (9Ch.
User Manual Chapter 10: Appendix 10.1 System connect sketch map 10.2 Accessories Included With DVR Camera cables (9 included) Power Supply For DVR USB 2.
