User's Manual

Call Device from Client Software
view window and click Start Two-Way Audio to start two-way audio.
Call Client Software from Device
Answer on the pop-up window
Call Indoor Station from Device
Call Center from Device
center answers the call, you can start two-way audio.
The device will call the center in priority when tap the administrator icon.
The secure door control unit should connect to an external power supply separately. The suggested external power supply is 12 V, 0.5 A.
Positions When Collecting/
Comparing Face Picture
(Recommended Distance: 0.5m)
Tips When Collecting/
Comparing Face Picture
Expression
Posture
Size
1.4m
0.5m
1.4m
Too High
Too Low
Too Close
Too Far
1.4m
1.2m
1.4m
Correct Tilt RaiseSide Bow
0.5m 0.5m
Recommended Height:
1.43m to 1.90m
Correct
Too Close Too Far
Recommended:
light or other items.
1:N Matching: The device will compare the captured face picture
with the ones in the database.
1:1 Matching: The device will compare the captured face picture
with the user linked face picture.
comparing face pictures, just like the expression in the
picture on the right.
Do not wear hat, sunglasses, or other accessories that
Do not make your hair cover your eyes, ears, etc. and
heavy makeup is not allowed.
Steps:
1. Create a password and confirm the password.
2. Tap
Sensor Input
Power Input
SENSOR
BUTTON
B1
B2
B3
B4
Green/Brown
Door Contact
Black
Green/Black
Black
Lock Output
NC
C1
C2
C3
COM
(NC)
Power
(NO)
(COM)
White/Purple
White/Black
White/Red
Exit Button
Face Recognition Terminal
NO
COM
NC
NO
COM
NC
Electric
Dropbolt
Electric
Strike
Secure Door Control Unit
Red
Black
Exit Button
RS-485
B1
B2
B3
Red/Black
Yellow
Blue
Secure Door
Control Unit
Wiring Terminal
Activate
Enter Password
Comfirm Password
Comfirm password.
Enter 8 to 16 characters.
Enter 8 to 16 characters.
3.2
Device Wiring (With Secure Door Control Unit)
4
Activation
5
Two-Way Audio
5
5
6
Add Face Picture
STRONG PASSWORD RECOMMENDED–
We highly recommend you create a strong password of your own
choosing (using a minimum of 8 characters, including upper case
order to increase the security of your product. And we
recommend you reset your password regularly, especially in the
1. Use finger to hold the screen surface for 3 s and slide to
page.
2. Enter the User Management page, tap + to enter the Add User
page.
3. Set the user parameters according to actual needs.
You can view the captured picture on the screen. Make sure the
face picture is in good quality and size.
comparing the face picture, see the contents on the right.
Or tap the try again icon to take another face picture.
Regulatory Information
This product and - if applicable - the supplied accessories too are marked with
"CE" and comply therefore with the applicable harmonized European standards
disposed of as unsorted municipal waste in the European Union. For proper
recycling, return this product to your local supplier upon the purchase of
www.recyclethis.info
disposed of as unsorted municipal waste in the European Union. See the
www.recycle-
this.info
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
EU Conformity Statement
FCC Information
responsible for compliance could void the user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
generates, uses and can radiate radio frequency energy and, if not installed and used in
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Conditions
Warnings
Please use the power adapter, which is provided by normal company. The power
Do not connect several devices to one power adapter as adapter overload may cause
over-heat or fire hazard.
Please make sure that the power has been disconnected before you wire, install or
dismantle the device.
When the product is installed on wall or ceiling, the device shall be firmly fixed.
If smoke, odors or noise rise from the device, turn off the power at once and unplug the
power cable, and then please contact the service center.
If the product does not work properly, please contact your dealer or the nearest service
responsibility for problems caused by unauthorized repair or maintenance.)
Do not drop the device or subject it to physical shock, and do not expose it to high
places subject to shock (ignorance can cause equipment damage).
The device cover for indoor use shall be kept from rain and moisture.
or radiator is forbidden (ignorance can cause fire danger).
Do not aim the device at the sun or extra bright places. A blooming or smear may occur
Please use the provided glove when open up the device cover, avoid direct contact with
the device cover.
cover, do not use alkaline detergents.
occurred, you need to return the device to the factory with the original wrapper.
present.
which may result in an explosion or the leakage of flammable liquid or gas.
explosion or the leakage of flammable liquid or gas.
Indoor use. When installing the device indoors, the device should be at least 2 meters
away from the light, and at least 3 meters away from the window or the door.
Safety Instruction
avoid danger or property loss.