Manual

http://www.ltsecurityinc.com/ Menu 27 | P a g e
Troubleshooting
Can’t See Video on Monitor
NVR Not Recording
DDNS Not Working
NVR Acting Strangely
Choppy Video
Cameras Disappear After Upgrade
The web client can be used to check and control the video output. The SADP tool will have to
be used to find the NVR’s address.
Configure > Remote Configure > Device Parameters > Menu Output
Check HDD
Check Schedule
Check Motion Settings
Check Primary DNS
Check the Gateway
Copy and paste link & user from ns1.dvrlists.com
Try using another browser (or switch IE to Compatibility Mode).
Reboot the NVR
Reset Settings (Factory Default)
Update or Downgrade Firmware
(See the Maintenance page.)
Change the Video Stream Quality in the Local Configuration.
Add them back from:
Configuration > Camera Management > IP Camera
Then click [Quick Add], select the cameras, and click [OK] to add them.