Setup Guide User guide

http://www.ltsecurityinc.com/ ▲ A u t h o r – R y a n D L a n g 2 | P a g e
Networking the NVR, IPC, & External PoE
Connecting the NVR to the Network
The NVR should be connected to the network
from its single LAN port. If the NVR comes
with built-in PoE ports, they should only be
connected to IP cameras.
Warning
The built-in PoE ports should not be
connected to a switch or router.
Only PoE powered IP cameras should be
connected to the built-in PoE switch.
Turn off power on external PoE switch ports
that are not connect to an IP camera.
The LAN port of the NVR can be connected to
a router, a switch, or an unpowered port of a
PoE switch.
IP cameras connect to the built-in PoE port
are isolated from the rest of the network.
This conserves bandwidth, but restricts IPC
configuration to the NVR.
PoE Switch and NVR to Router
+ Easier setup; uses one switch port
- No bandwidth isolation for PoE switch
NVR to PoE Switch to Router
+ Bandwidth isolation
- Uses another port on the PoE switch
!
!