Setup Guide User guide

http://www.ltsecurityinc.com/ ▲ A u t h o r – R y a n D L a n g 24 | P a g e
Troubleshooting
Can’t See Video on Monitor
NVR Not Recording
DDNS Not Working
Cameras Disappear After Upgrade
The web client can be used to check and control the video output. The SADP tool will have to
be used to find the NVR’s address. Type the NVR’s IP address into a web browser.
Configure > Remote Configure > Device Parameters > Menu Output
Check HDD
Check Schedule
Check Motion Settings
Check Primary DNS
Check the Gateway
Copy and paste link & user from ns1.dvrlists.com
Add them back from:
Configuration > Camera Management > IP Camera
Then click [Quick Add], select the cameras, and click [OK] to add them.
Written by Ryan D. Lang