Setup Guide User guide

http://www.ltsecurityinc.com/ ▲ A u t h o r – R y a n D L a n g 6 | P a g e
Camera Configuration (Picture / Name)
Adjusting a Camera’s Picture
The camera image can be adjusts is a variety of ways (e.g. rotated
180°). Please note that the camera, itself, is being configured from the
NVR. These options are under:
Menu > Camera > Image
To rotate an image, change the “Mirror” setting to “Center”.
Note: If the IP camera is connected to an external PoE switch, then the
camera can be configured directly from its web client.
Changing a Camera’s Name
By default, each camera is named “CAMERA01.” This is because the
name of each camera is stored, not on the NVR, but on the camera
itself. The name can be changed from:
Menu > Camera > OSD
Note: It is often easier to use the web component for this task. It is
easier to type from a computer. A keyboard cannot be used with the
NVR.