Manual

User Manual of 5 Inch Network Speed Dome
25
scan
109
Reserved
200
Initialize PTZ parameters
110
Reserved
4.4.3 Setting / Calling a Patrol
Purpose:
A patrol is a memorized series of preset function. It can be configured and called on
the patrol settings interface. There are up to 8 patrols for customizing. A patrol can
be configured with 32 presets.
Before you start:
Please make sure that the presets you want to add into a patrol have been defined.
 Setting a Patrol:
Steps:
1. In the PTZ control panel, click to enter the patrol settings interface.
2. Select a patrol number from .
3. Click to enter the adding interface of preset as shown in Figure 4-6.
Figure 4-6 Adding Presets
4. Configure the preset number, patrol duration and patrol speed.
Name
Description
Patrol Duration
It is the duration staying on one patrol point. The speed
dome moves to another patrol point after the patrol
time.
Patrol Speed
It is the speed of moving from one preset to another.