Manual

User Manual of System Keyboard
- 10 / 21 -
Example: No. 3 monitor switches frames of No. 1—6 cameras for 2 seconds
of stop.
3 + MON .(select a monitor)
2 + TIME .（switch stop time automatically）
1 + ON .（start camera number）
6 + OFF .（end camera number）
1.10.2 Set the stop time of a camera in the free switching queue:
Operate according to the following steps:
1. Enter the required stop time (2-240 seconds).
2. Then press TIME key .
1.10.3 Run the free switching:
1. Enter 0 digit key .
2. Then press RUN key .
1.10.4 Add one camera to the programmed free switching queue:
Operate according to the following steps:
1.Press the camera number.
2.Press ACK key.
3.Press ON key.
1.10.5 Delete one camera from the programmed free switching queue:
Operate according to the following steps:
1. Press the camera number.
2. Press ACK key .
3. Press OFF key.
1.10.6 Stop the running of free switching:
By pressing n（non-zero key ）+ CAM key, stop the running of free
switching , and retain the camera frame called for display.
Press 0 + RUN key to continue the free switching.
1.10.7 Increment/decrement single-step switching or changing the
direction of switching:
After pressing NEXT key，the switching direction will run in the form
of increment;
After pressing LAST key，the switching direction will run in the form
of decrement;
User Manual of System Keyboard
- 11 / 21 -
1.11 System program switching:
System program switching is the condition where, after appropriate
programming of the menu in the matrix mainframe, a series video inputs
designated can be automatically shown on the monitor in sequence, and each
video input can display a switching queue of stop time set.
1.11.1 Set program switching queue:
See the TOUR（program switching）under the menu function of
SWITCH（switching setting）in the mainframe.
1.11.2 Operate the program switching queue:
1.On the keyboard, enter the serial numbers 1-32 called for system
switching.
2.Press RUN key .
Example: No. 2 program switching will run on No. 3 monitor:
1.Enter the figure 3 ，
，，
，Press MON key for confirmation.
2.Enter the figure 2 ，
，，
，Press RUN key for operation.
1.11.3 Change the running direction of program switching:
After pressing NEXT key，the switching direction will run in the form of
increment;
After pressing LAST key，the switching direction will run in the form of
decrement;
1.11.4 Stop the operation of program switching:
By pressing HOLD key or n（non-zero figure）+ CAM key, stop the running
of free switching. HOLD key can have a picture to stay on a camera frame
being switched, while n（non-zero figure）+ CAM key can have a picture to
stay on a selected picture.
1.12 System synchronous switching
System synchronous switching means a group of camera frames can be shown
in sequence by switching to a group of continuous monitors and programmed
through the system setting menu.