User's Manual

Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.
FIBOCOM SS808 Series Hardware User Manual Page 13 of 72
1 Introduction
1.1 Instruction
This document describes the electrical characteristics, RF performance, structure size, application
environment, etc. of SS808 series module. With the assistance of the document and other instructions,
the developers can quickly understand the hardware functions of the SS808 series module and develop
products.
1.2 Reference Standards
⚫ 3GPP TS 51.010-1 V10.5.0: Mobile Station (MS) conformance specification; Part 1:
Conformance specification
⚫ 3GPP TS 34.121-1 V10.8.0: User Equipment (UE) conformance specification; Radio
transmission and reception (FDD); Part 1: Conformance specification
⚫ 3GPP TS 34.122 V10.1.0: Technical Specification Group Radio Access Network; Radio
transmission and reception (TDD)
⚫ 3GPP TS 36.521-1 V10.6.0: User Equipment (UE) conformance specification; Radio
transmission and reception; Part 1: Conformance testing
⚫ 3GPP TS 21.111 V10.0.0: U(U)SIM and IC card requirements
⚫ 3GPP TS 51.011 V4.15.0: Specification of the Subscriber Identity Module -Mobile Equipment
((U)SIM-ME) interface
⚫ 3GPP TS 31.102 V10.11.0: Characteristics of the Universal Subscriber Identity Module
(U(U)SIM) application
⚫ 3GPP TS 31.11 V10.16.0: Universal Subscriber Identity Module (U(U)SIM) Application Toolkit
(USAT)
⚫ 3GPP TS 36.124V10.3.0: Electro Magnetic Compatibility (EMC) requirements for mobile
terminals and ancillary equipment
⚫ 3GPP TS 27.007 V10.0.8: AT command set for User Equipment (UE)
⚫ 3GPPTS27.005 V10.0.1: Use of Data Terminal Equipment - Data Circuit terminating Equipment
(DTE - DCE) interface for Short Message Service (SMS) and Cell Broadcast Service (CBS)
1.3 Related Document
NA