Instructions

6. Wiring diagram:
G
R
B
G
R
B
G
R
B
G
R
B
G
R
B
G
R
B
G
R
B
G
R
B
G
R
B
G
R
B
G
R
B
G
R
B
G
R
B
G
R
B
G
R
B
G
R
B
a.Conventional connection method.
LED pixel strip wiring diagram:
Power adapter
LED pixel strip
SPI-16S receiver
ID learning button
Running light
SPI-16S LED Fantastic controller SPI-16S LED Fantastic controller
ID Learning Button
Power Input Socket
Running Light
5. Terminal description:
LED Lamps
Connection Socket
4. The remote instruction:
Speed
Brightness
Direction
0-15
Mode Keys
On/Off
Scene Keys
Loop Playback
Pause/Continue
Setting Key
7 colors jump
7 colors horse race
6 colors trail
6 colors float
7 colors flash
7 colors circle horse race
6 colors circle trail
6 colors double trail
7 colors fade
7 colors flow
Gradients trail
Color white float
7 colors smooth
7 colors gradients flow
White meteor
Bi-color float
Long press: save scene
The Learning ID Method:
Learning ID:
Press “ID learning button” on SPI-16S receiver for 5s, the running
light flicker several times, canceled.
Short press “ID learning button” on SPI-16S receiver, the running
light is on. Then press any key on M16 remote , the running light
flicker several times, activated.
Canceling ID:
Update Time: 2020.08.20
www.ltech-led.com
Other Setting Instructions of Remote
[Attn]: The running light of SPI-16S controller flashes 2s means set completed.
2.
Manipulate table for choosing ICs, RGB order or pixel No.
1.
Loop playback: Short press key, then continuous press any 0-15 numeric keys, last press key to finish.
Controller will play cycle the corresponding mode of the numeric key.
After the remote being paired with the controller, the IC model, pixel ranges and RGB sequence can be set by
the remote.
By factory default, controller works with TM1809IC pixel light. If work with different IC model, please setting follow
below instructions. This controller is compatible with following IC models:
When setting IC type, pixel number and RGB order, select multiple keys at uniformed speed. Not too fast.
Pixel
Range: 8-1020 pixels
RGB Order
IC Type
Setting e.g. Setting e.g. Setting
TM1803/TM1804/TM1809/TM1812/TM1814/TM1914/TM1914A/UCS1903/UCS1909/ UCS2904B/
UCS1912/UCS2903/ U
CS2909/UCS2912/ UCS6909/UCS6912/WS2801/WS2803/WS2811/WS2812/WS2812B/
UCS5603A/ WS2821/APA102/AP
A104/KL590/KL592D/LPD6803/LPD1101/LPD8803/LPD8806/P9813/TLS3001/TLS3002/P943/SK6812(RGB)/GS8206
3 4
No further notice if any changes in the manual.
Product function depends on the goods.
Please feel free to contact your supplier if any question.
8
16
100
160
1020
RGB
RBG
GRB
GBR
BRG
BGR
*123*
*132*
*213*
*231*
*312*
*321*
**008
**016
**100
**160
**1020
TM1809
LPD6803
KL590
KL592D
APA102
*1809*
*6803*
*0590*
*0592*
*0102*
DATA
+
GND
GND
5M
5M
5M
5M
R
G
G
R
G
G
5M
5M
R
G
G
R
G
G
R
G
G
R
G
G
R
G
G
R
G
G
+
R
G
G
R
G
G
+
+
+
+
GND
GND
GND
GND
CLK
CLK
DATA
R
G
G
R
G
G
12Vdc
Power supply
12Vdc
Power supply
12Vdc
Power supply
Pixel strip
b.Light fixtures and controller using different operating voltages.
5-24Vdc
Power supply
36Vdc
Power supply
Pixel strip
36Vdc
Power supply
36Vdc
Power supply
The receiver and remote are Pre-synced at factory. If deleted
accidentally, the sync method is as follows (multiple remotes
could be synced to one receiver):
(BGR)/GS8208/SM16703 in factory default.