Ceramic Cooktop Instruction Manual / Installation Manual MODEL: SCM469R1
Safety Warnings Your safety is important to us. Please read this information before using your cooktop. The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction. Children being supervised not to play with the appliance.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
CAUTION: The cooking process has to be supervised. A short term cooking process has to be supervised continuously. WARNING: Danger of fire: do not store items on the cooking surfaces. WARNING: Use only cooktop guards designed by the manufacturer of the cooking appliance or indicated by the manufacturer of the appliance in the instructions for use as suitable or cooktop guards incorporated in the appliance. The use of inappropriate guards can cause accidents.
Product Overview Top View Heating Zone Power Heating Zone Power 2200W 1200W 1500W/3000W （Double ring） 500W Total Rating Power 6900W 5
User Interface Reference Description Zone select key A ON/OFF key B Power regulating key(reduce) C Power regulating key(increase) D Double ring control key E Child Lock key F Timer key G 6
Product Functions > The ceramic cooktop caters for all kind of cooking, with its radiant heat cooking zones and its electronic touch controls and multi-functions, making it the ideal choice for the modern family. > The ceramic cooktop is extremely user-friendly, durable and safe. Special Functions Protection from over-heating A sensor monitors the temperature in the cooking zones. When the temperature exceeds a safe level, the cooking zone is automatically switched off.
Before Using Your New Ceramic Cooktop • Read this guide, taking special note of the ‘Safety Warnings’ section. • Remove any protective film that may still be on your ceramic cooktop. Using the Touch Controls • The controls respond to touch, so you don’t need to apply any pressure. • Use the ball of your finger, not its tip. • You will hear a beep each time a touch is registered. • Make sure the controls are always clean, dry, and that there is no object (e.g. a utensil or a cloth) covering them.
Always lift pans off the ceramic cooktop – do not slide, or they may scratch the glass. Using Your Ceramic Cooktop To start cooking 1. Place a suitable pan on the cooking zone that you wish to use. • Make sure the bottom of the pan and the surface of the cooking zone are clean and dry. 2. Touch the ON/OFF key for 3 secnds. After power on, the buzzer beeps once, all displays show “ 0 “, indicating that the ceramic cooktop has entered the state of standby mode. 3.
5. The power level will start at 0. Pressing the “+”will count up the power levels from 0 to 9 in numerical order. Pressing the “-”key will take the power straight from 9 to 0. • If you don’t choose a heat setting within 20 seconds, the ceramic cooktop will automatically switch off. You will need to start again at step 2. • You can modify the heat setting at any time during cooking.
2. Press the timer key 3. Using the “ ” or “ , the timer indicators will show “00”. ” buttons, you can realize the setting of timing from 1 to 99 minutes. 4. When the time is set, it will begin to count down immediately.The red dot next to power level indicator will illuminate indicating that zone has set timer. 5. If you need to check the remaining time, you can operate step 1 and step 2 again. 6. When cooking timer expires, the corresponding cooking zone will be switch off automatically.
Care and Maintenance Warning Always switch off the electricity supply before performing maintenance work. In the event of a fault, contact customer services. Care Damaged power cables should be replaced by a competent person or qualified electrician. For domestic use only. Never place an empty pan on the cooktop as this will cause an error message to appear on the control panel.
Appliance Cleanliness Caution • Avoid rubbing with any abrasive or with the base of the pans, etc, as this will wear the markings on the top of the ceramic cooktop over time. • Clean the ceramic cooktop on a regular basis to prevent the build up of food residue. > The appliance should be cleaned after use.
By means of a scraper immediately remove any aluminum foil bits, food spills, grease splashes, suger marks and other high sugar content food from the surface in order to avoid damaging the cooktop. Subsequently clean the surface with some towel and appropriate product, rinse with water and dry by means of a clean cloth. Under no circumstance should sponges or abrasive cloths be used; also avoid using aggressive chemical detergents such as oven sprays and spot removers.
Trouble Shooting Before calling the customer services, please check that the appliance is correctly connected, any of the following cases are not covered by the guarantee > Damage caused by improper use, storage or maintenance. > Damage caused by unauthorized disassembly and repair. > Damage caused by misuse. > Using the ceramic cooktop for commercial purposes.
Installation Selection of Installation Equipment Cut out the work surface according to the sizes shown in the drawing. For the purpose of installation and use, a minimum of 5 cm space shall be preserved around the hole. Be sure the thickness of the work surface is at least 30 mm. Please select heat-resistant work surface material to avoid larger deformation caused by the heat radiation from the hotplate.
A(mm) B(mm) C(mm) D E 650 50 mini 20 mini Air intake Air exit 5mm Before you install the cooktop, make sure that • The work surface is square and level, and no structural members interfere with space requirements. • The work surface is made of a heat-resistant material. • If the cooktop is installed above an oven, the oven has a built-in cooling fan. • The installation will comply with all clearance requirements and applicable standards and regulations.
Installation 18
Cautions 1. The ceramic hotplate must be installed by qualified personnel or technicians. We have professionals at your service. Please never conduct the operation by yourself. 2. The cooktop will not be installed directly above a dishwasher, fridge, freezer, washing machine or clothes dryer, as the humidity may damage the cooktop electronics. 3. The ceramic hotplate shall be installed such that better heat radiation can be ensured to enhance its reliability. 4.
North American Power Line Access Method Electrical Connection Options(240V) 20
This Appliance Requires a 32 Amp Miniature Circuit Breaker. • If the cable is damaged or to be replaced, the operation must be carried out the by after-sale agent with dedicated tools to avoid any accidents. • If the appliance is being connected directly to the mains an omnipolar circuit-breaker must be installed with a minimum opening of 3mm between contacts. • The installer must ensure that the correct electrical connection has been made and that it is compliant with safety regulations.
