Use and Care Manual

15
Trouble shooting
Before calling the customer services, please check that the appliance is
correctly connected, any of the following cases are not covered by the
guarantee
> Damage caused by improper use, storage or maintenance.
> Damage caused by unauthorized disassembly and repair.
> Damage caused by misuse.
> Using the ceramic hob for commercial purposes.
错误代码
Error
Message
Possible Cause
What to do
E2
The NTC open circuit.
Cut off power and repair abnormal circuits.
E3
The NTC short circuit.
Cut off power and repair abnormal circuits.
Er21
The temperature inside the produce was too
high.
The produce must be stopped and cooling.
Er03
Water or pot on the glass over the control.
Cut off power and repair abnormal circuits.
E
The temperature sensor failure.
Replace the temperature sensor.
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and damages
to the ceramic hob and please contact the supplier.
Technical Specification
Cooking Hob
SCM590R1
Cooking Zones
5 Zones
Supply Voltage
220-240V~
Installed Electric Power
9000W(240V~)
Product Size L×W×H(mm)
900X520X47
Building-in Dimensions A×B (mm)
875X495
Weight and Dimensions are approximate. Because we continually strive to
improve our products we may change specifications and designs without prior
notice.