Installation Guide

Aria Fan Installation Instructions
5 | P a g e ？？
HANGING THE FAN
Pass the power supply wires (C) from the ceiling outlet box (B) through the center of the ceiling mounting
bracket (D). Install the ceiling mounting bracket (D) on the outlet box (B) with the mounting screws (F)
provided with the outlet box and washers (E) provided with fan. Fig. 6
Lift the fan assembly onto the mounting bracket. Ensure the registration slot (A) of the hanger ball is
positioned on the stopper (B) of the mounting bracket (C) to prevent the fan from rotating when in
operation. Fig.7
INSTALLING THE FAN
Blade attachment
1. Before Installing the blades, remove the motor screws and flat
washers.
2. Secure the blade on the motor by using 2 screws with washers
to tighten it, ensuring they are tightened simultaneously. (Take
care not to over tighten as this can damage blades)
Once completed, repeat the process on the remaining
blades.
Installing the LED light kit (For fan with light)
CAUTION – To reduce the risk of electric shock, disconnect the electrical
supply circuit to the fan before installing light kit. Ligth kit weight: 1.31 lb.
Attach the LED light kit to the lamp base and connect wires to the LED light kit
via the quick connectors. Secure the LED light kit on the lamp base by turning
the LED light kit body clockwise.
Fig. 6
Fig. 7
Fig. 5
Fig. 9
Fig. 8