Installation Guide

Aria Fan Installation Instructions
6 | P a g e ？？
ELECTRICAL WIRING DIAGRAM
WARNING: To avoid possible electrical shock, be sure you have turned off the power at the main circuit
panel.
Follow the steps below to connect the fan to your household wiring. Use the wire connecting nuts supplied
with your fan. Secure the connectors with electrical tape. Make sure there are no loose wire strands or
connections.
1. Connect the household live supply wire (black) to
receiver input wire (black, AC IN L) as shown in Fig.
10.
2. Connect the household neutral supply wire (white)
to the receiver input wire (white, AC IN N).
3. Connect the household ground wire to the fan
bracket ground wire (green) and fan body ground
wire.
4. Connect the reveiver output wire (black, TO
MOTOR L) to motor live input wire (black, TO
MOTOR L).
5. Connect the receiver output wire (white, TO
MOTOR N) to motor neutral input wire (white, TO
MOTOR N)
6. Connect the receiver output wire (blue, FOR
LIGHT) to fan light live input wire (blue, FOR LIGHT)
7. After connecting the wires, spread them apart so
that the green and white wires are on one side of the
outlet box and the black and blue wires are on the
other side.
8. Turn the connecting nuts upward and push the
wiring into the outlet box.
Fig. 10