Computer Hardware User Manual

Memory Module
When installed in the MERLIN
®
Plus system control unit, this memory
module (Figure 1) upgrades your system to the MERLIN Plus Communi-
cations System Release 2.
MEMORY
MODULE
Figure 1
MERLIN Plus Communications System Release 2 Memory Module
The new system features available with this memory module are listed
below. For further informaiton about each feature, refer to Section 5,
"Reference," of your new MERLIN Plus Communicaiton System
Release 2 System Manual.
● Automatic System Access Features
> Call Forwarding (CF)
> Direct Extension Dialing (DXD)
> Remote Line Access (RLA)
> System Answer (SA)
● Busy Buster
● Disallowed Lists
● Exclusive Hold
● Hold Disconnect Interval
● Program Mode Lock
● Voice Terminal Template
NOTE: Some programming
operations also vary for the MERLIN Plus
Communications System Release 2. Refer to your new System Manual
for further information. This memory module comes with two 2-foot
(D4BU) modular cords. These cords are used to connect the Busy Bus-
ter (BB) and Automatic System Acces (ASA) features as explained in
Secton 5 of your new System Manual.
1