Switch Router Adapter Owner's Manual

Log Messages
Message descriptions
SP Switch Router Adapter Guide - 1.4 Update 2 October 22, 1999 B-7
“Expect NODE_INIT but received Stat/Err Request”
LOG_FILE: /var/log/gr.console
SOURCE_FILE: rx/tbsi_svc.c
SCOPE: CARD
CONTEXT: RUNNING
SEVERITY: INFO
DESCRIPTION: This message is logged when a Read Status service message is received
while the SP Switch Router Adapter card is expecting a NODE_INIT message.
“Expired IP buffer received: %d”
LOG_FILE: /var/log/gr.console
SOURCE_FILE: rx/tbsi_rx.c
SCOPE: CARD
CONTEXT: RUNNING
SEVERITY: WARNING
DESCRIPTION: This message is logged when the RX CPU receives an IP header from
the receive HW logic for which the buffer has been returned to the pool. This is an
indication of errors in the receiving logic (software and/or hardware). If the problem
persists, please contact Customer Support.
“Hot interrupt detected, ier1=0x%8x, ier2=0x8x”
LOG_FILE: /var/log/gr.console
SOURCE_FILE: rx/tbsi_svc.c
SCOPE: CARD
CONTEXT: RUNNING
SEVERITY: FATAL
DESCRIPTION: This message is logged when a TBIC hot-interrupt condition has been
detected.
“Hot interrupt detected, ier1=0x%8x, ier2=0x8x”
LOG_FILE: /var/log/gr.console
SOURCE_FILE: tx/tbsi_svc.c
SCOPE: CARD
CONTEXT: RUNNING
SEVERITY: FATAL
DESCRIPTION: This message is logged when a TBIC hot-interrupt condition has been
detected.
“Initializing Main Task...”
LOG_FILE: /var/log/gr.console
SOURCE_FILE: rx/main.c
SCOPE: CARD
CONTEXT: RUNNING
SEVERITY: INFO
DESCRIPTION: This message is logged when the RX-CPU enters its main control
(while) loop.