user manual

DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Object Repair Procedures
Page 10-492DIG-LINE (Digital Line)
10
DIG-LINE Station Lamp Updates Test (#16)
This test lights all lamps on the terminal as specified. The lamp updates will run
only if the station is in-service. The status of the station is checked and the lamp
updates are blocked from taking place if the station is not in the in-service state.
This test does not affect the status of the Message Waiting lamp.
7 FAIL Conference Test failed on primary channel. In some cases,
users may not notice disruption in service. In extreme cases,
conferencing feature may not work at all.
14 FAIL The primary voice channel is not transmitting properly. User
impact may range from noticing nothing to not being able to
use this port.
15 FAIL The control channel between the processor and digital circuit
pack is not transmitting properly. User impact may range
from noticing nothing to not being able to use the port. Could
also be disruptive to other users.
16 FAIL The secondary voice channel is not transmitting properly.
User impact may range from noticing nothing to not being
able to use this port.
1. Run circuit pack tests to check the Tone Generator circuit
pack and the Tone Detector circuit pack using the test
board UUCSS s/PCSS s command.
2. Resolve any problems that are detected on the Tone
Generator circuit pack or Tone Detector circuit pack.
3. If the Tone Generator and Tone Detector circuit packs
are functioning properly, and the test still fails, replace
the Digital Line circuit pack.
PASS Voice and Control Channel Local Loop test passed. All
channels are transmitting properly.
1. To be sure that this is not an intermittent problem, repeat
this test up to a maximum of 10 times to make sure it
continues to pass.
2. If complaints persist (noisy connections for voice,
corrupted data for data transfer), examine the station,
connections, and wiring.
Table 10-132. TEST #13 Voice and Control Channel Local Loop Test — Continued
Error
Code
Test
Result Description/ Recommendation
Continued on next page