user manual

DEFINITY Enterprise Communications Server Release 5

Maintenance and Test for R5vs/si

555-230-123

Issue 1

April 1997

Maintenance Object Repair Procedures

Page 10-763HYB-LINE (Hybrid Line)

Table 10-213. TEST #61 Hybrid Line Audits Test

Error

Code

Test

Result Description/ Recommendation

ABORT Internal System Error

1 ABORT The test was aborted due to an internal system error

during the switchhook audit.

2 ABORT Internal System Error occurred during bad scan inquiry

audit.

1. Make sure that the station is not in an out of service

state.

2. Retry the command at 1-minute intervals a maximum

of 5 times.

3. If the test continues to abort, escalate the problem.

3 ABORT This port may have been busied out by system

technician.

1. Look in the Error Log for Error Type 18 (port busied

out) for this port. If this error type is present, the

release the port via the release station

<extension> command and run the test again.

2. Make sure that the terminal is connected.

3. Retry the command at one-minute intervals a

maximum of five times.

4. If the test continues to abort, escalate the problem.

Continued on next page