user manual

DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Object Repair Procedures
Page 10-1253SPE-SELEC (SPE Select Switch)
10
Notes:
a. Refer to the DUPINT (Duplication Interface Circuit Pack) Maintenance
documentation for description of this test.
b. Refer to the SHDW-CIR (Common Shadow Circuit) Maintenance
documentation for description of this test.
SPE Select Query Test (#278)
This test queries the Duplication Interface circuit pack for the state of SPE Select
Switch. The test passes if the switch is in the AUTO position. The test fails if the
switch is not in the AUTO position or if the Duplication Interface circuit pack is not
present.
1. D = Destructive; ND = Nondestructive
Duplication Interface Circuit Pack Sanity Maze Test (#277)
(a)
XXND
Duplication Interface Circuit Pack SPE A Loop Back Test
(#275) (a)
XXND
Duplication Interface Circuit Pack SPE B Loop Back Test
(#276) (a)
XXND
Duplication Interface Circuit Pack Manager I Loop Back
Test (#274) (a)
XXND
Inter-Duplication Interface Circuit Pack Loop Back Test
(#280)
XXND
Duplication Interface Circuit Pack Background Test Query
Test (#271) (a)
XXND
Duplication Interface Circuit Pack Invalid Message Query
Test (#272) (a)
XXND
Common Shadow Circuit M-BUS Time-out Query Test
(#285) (b)
XND
Common Shadow Circuit Loop Back Test (#283) (b) X X ND
Common Shadow Circuit Address Decoder Test (#284) (b) X X ND
SPE Select Switch Query Test (#278) X X ND
Order of Investigation
Short Test
Sequence
Long Test
Sequence D/ND
1
Continued on next page