user manual

DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-88disable administered-connection
8
Synopsis
disable administered-connection [ac number | all]
Permissions
The following default logins may execute this command: inads, init, system
technician, cust, rcust, mis.
Examples
disable administered-connection all
disable administered-connection 1
disable administered-connection 128
Description
The disable administered connection command inhibits scheduled and periodic
testing from being performed on all or a single administered connection(s). This
command stops the processing of in-line errors for all or the selected
administered connection(s).
Defaults
None.
Parameters
Help Messages
If the user presses HELP after entering "disable administered-connection," the
following message will be displayed:
Enter assigned administered connection number(1-128) or ’all’
Error Messages
If the administered connection number entered is not "all" and is non numeric, the
following message is displayed:
Identifier invalid
If the administered connection number entered is not within the valid range of
connections, the following message is displayed:
ac number The number of the administered connection being disabled.
all If "all" is entered then all administered connections are disabled.