user manual

DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-276release cdr-link
8
Output
For the following output example, assume that the board in cabinet 1, carrier c,
slot 7 is an analog board with three ports administered. The command that was
entered is "release board 1c07."
Feature Interactions
None.
release cdr-link
This command will release a maintenance object associated with the specified
call detail recording (cdr)-link.
Port The port address (cabinet-carrier-slot) of the maintenance object
that is being released.
Maintenance Name The type of maintenance object that is being released.
Alt. Name The alternate means of identifying the maintenance object. This
field contains the extension when the object is a station, and it
contains xxx/yyy when the object is a trunk, where xxx is the trunk
group number and yyy is the member number. It contains P/xxx
when the object is a private CO line, where xxx is the private CO
line group number.
Result The result of the release -"PASS," "ABORT," "FAIL."
Error Code A system-generated number that tells why the release failed or
aborted. A detailed list of the codes can be in the
"Busyout/Release Commands" section of this chapter.
release board 01C07
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
01C07 ANL-BD PASS
01C0702 ANL-LINE PASS
01C0701 ANL-LINE 51001 PASS
01C0703 ANL-LINE PASS
Command successfully completed