user manual

DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-295release port
8
Output
For the following output example, assume that the command that was entered is
"release pms-link."
Feature Interactions
The maintenance of a particular component on a link may interfere with the
maintenance of the link itself. Maintenance can put a link component in a busy
state causing link set-up to fail. Frequent attempts at re-setup of a link may delay
the recover of a faulty component, due to the maintenance test of a component
only taking place when the component is idle. The technician needs to be able to
disable the attempted re-setup of a link. The busyout command is used to do
this, and will not cause the link to be torn down. If the link is already down, the
busyout command will stop periodic re-setup trys on the link.
release port
This command will release a specified port on a circuit pack.
Synopsis
release port location
Port With this maintenance object the port field is left blank.
Maintenance Name The type of MO that is being released (always PMS-LINK).
Alt. Name Not applicable.
Result The result of the release -"PASS," "ABORT," "FAIL."
Error Code A system-generated number that tells why the release failed or
aborted. A detailed list of the codes can be in the "Busyout/Release
Commands" section of this chapter.
release pms-link
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
PMS-LINK PASS
Command Successfully Completed