user manual

DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-416status conference
8
In Use Is the endpoint currently participating in the conference or in process of
connecting to the conference? - y, c, e, f, n, blank.
y means that the endpoint is in use and is fully connected on all media
in an active conference.
c means that the endpoint is in use and is fully connected, however the
endpoint has changed the conference audio or video capability or has
changed the rate of the conference because of rate adaptation. This
condition requires analysis of this endpoint’s capabilities and mode
fields to identify which capability was reduced.
e means that the endpoint is in use but the endpoint had capability
problems. The endpoint does not have one of the required capabilities
(Vid, Bhl, MLP) to be a full participant. For MLP capabilities, see the
“T120” field. This condition requires analysis of this endpoint’s
capabilities and mode field to identify the missing capability.
f means that the endpoint is in use but is not connected to all media.
This indicates that the endpoint has declared all the required
capabilities (channel/video/ audio/data) but is not fully connected to all
conference media at this time. This endpoint may be in the process of
connecting, has failed to connect, or is not a valid video source. This
condition requires analysis of this endpoint’s capabilities and mode
fields to identify the problem.
n means that the endpoint was connected in a conference but has/was
disconnected or attempted to connect to a conference but was
unsuccessful.
blank means the field is blank until the first call is made from/to the
endpoint.
Chl Data on the quantify and quality of channels (transfer rate)? - y, e, n,
blank
y the endpoint has the required number of channels.
e means that the endpoint has not declared support for the correct
number of channels and cannot participate fully in the conference.
n means that the endpoint has declared the correct number of
channels, but all the channels have not yet joined the conference, due
to either a network or endpoint problem.
blank Audio add-on endpoints always have the Chl field set to blank.