Indoor Fireplace User Manual

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
6
Step 3. Refer to fireplace drawings and specifi-
cations on pages 6 and 7 for framing dimensions
and details. Frame appliance enclosure as illus-
trated in Figures 12 through 15 on page 7.
IMPORTANT: UNDER NO CIRCUMSTANCES
CAN THE FIREPLACE TOP SPACERS ( SEE
FIGURE 11 ) BE REMOVED OR MODIFIED,
NOR MAY YOU NOTCH THE HEADER TO FIT
AROUND OR BE INSTALLED LOWER THAN
THE SPACERS. THE HEADER MAY BE IN DI-
RECT CONTACT WITH THE TOP SPACERS
BUT MAY NOT BE SUPPORTED BY THEM.
Step 4. Fireplace may be anchored to floor.
Bend down four (4) anchor tabs located at the
base of the fireplace and secure to the floor by
nailing with 8d nails ( Figure 10 ).
Note: The “Z” type safety strip is not supplied.
Figure 8
Figure 9
Figure 10
Anchor
Ta b
Metal Safety Strips
with 1" (25mm)
Overlap
2"
(51mm)
Special “Z” Metal
Safety Strips with 1"
(25mm) Overlap
2"
(51mm)
Blocking
Platform
FIREPLACE SPECIFICATIONS
Figure 11
66 ¹⁄₁₆"
(1678 mm)
4 ¹⁄₂"
(114 mm)
47 ¹⁄₈"
(1197 mm)
10 ⁵⁄₈"
(270 mm)
8 ³⁄₄"
(222 mm)
4 ¹⁄₈"
(105 mm)
Right Side
15" O.D.
(381mm)
6 ⁹⁄₁₆"
(167mm)
1 ⁵⁄₁₆"
(33mm)
45 ¹⁄₄"
(1149mm)
29"
(737mm)
42 ⁹⁄₁₆"
(1081mm)
7"
(178mm)
66 ¹⁄₁₆"
(1678mm)
17 ¹₂"
(445mm)
47 ¹⁄₈"
(1197mm)
10 ⁵⁄₈"
(270mm)
8 ³⁄₄"
(222mm)
13 ¹⁄₄"
(337mm)
Left Side
Front View
37 ¹⁄₄"
(946 mm)
11"
(279 mm)
29 ⁷⁄₁₆"
(748 mm)
47 ⁷⁄₈"
(1216 mm)
Top View
1"
(25 mm)