User's Manual

DEFINITY ECS Release 8.2 Maintenance for R8.2csi 555-233-119 Issue 1
April 2000
Maintenance Commands
2-73display node-names
2
Output
The following example shows the output from the
display memory
command.
display node-names
This command displays a list of the administered node names.
Output
The following example shows the output from the
display node-names
command.
Page 1
Action/ Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
display
node-names
print
schedule
Example:
display node-names
init
inads
craft
none none
display memory-configuration
PROCESSOR MEMORY-CONFIGURATION
(M bytes)
SPE_A
Flash ROM: 16
Total DRAM: 16
Command successfully completed
Command:
page 1 of 6
NODE NAMES
Audix Name IP address MSA Names IP Address
1. _______ ___.___.___.___ 1. _______ ___.___.___.___
2. _______ ___.___.___.___ 2. _______ ___.___.___.___
3. _______ ___.___.___.___ 3. _______ ___.___.___.___
4. _______ ___.___.___.___ 4. _______ ___.___.___.___
5. _______ ___.___.___.___ 5. _______ ___.___.___.___
6. _______ ___.___.___.___ 6. _______ ___.___.___.___
7. _______ ___.___.___.___ 7. _______ ___.___.___.___
8. _______ ___.___.___.___