User's Manual

DEFINITY ECS Release 8.2 Maintenance for R8.2csi 555-233-119 Issue 1
April 2000
Maintenance Commands
2-95enable administered-connection
2
enable administered-connection
This command restarts scheduled and periodic maintenance for a single or all
administered connections and can be used to track the maintenance processing
of administered connections without interference from other maintenance
processing. This command also restarts the processing of in-line errors for all or
the selected administered connection.
enable mst
Enables the message trace that is controlled according to the parameters
created with the
change mst
command. If executed while the trace is enabled,
the command has no effect and returns a screen message indicating that the
command was successful.
enable suspend-alm-orig
This command enables Suspend Alarm Origination for a board (including all
ports and endpoints on the board) or for a port (including all endpoints on the
port) for both on- and off-board alarms or for off-board alarms only. Many control
circuit packs do not have a board location, so this command cannot support all
circuit packs. Each enable command becomes a new entry or replaces an
existing entry in the Suspend Alarm Origination table. A new entry that matches
both the physical location and off-only, on-, and off-board specifications of an
active entry replaces the active entry in the Suspend Alarm Origination table.
On the command line, specify a time-out duration of 1 - 72 hours. The
off-board-only is optional; if the keyword is not specified, the entry suspends
Alarm Origination for both on-and off-board alarms.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
enable
administered-
connection
ac number
all
The number of the administered
connection
All administered connections are
enabled.
Examples:
enable administered-connection 128
enable administered-connection all
init
inads
craft
cust
rcust
mis
none none
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
enable mst
init
inads
none none