User's Manual

DEFINITY ECS Release 8.2 Maintenance for R8.2csi 555-233-119 Issue 1
April 2000
Maintenance Commands
2-98get vector
2
Output
Field descriptions
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
get vector
long
print
Core dump timestamps printed; if
SPEs are duplicated, timestamps
are printed for both SPEs.
Prints report on system printer.
Examples:
get vector
get vector print
get vector long
get vector long print
init
inads
craft
none none
Core Dump Vector
A hexadecimal value representing the condition(s) that cause(s) a
core dump. This hexadecimal value is a bit map of the four reset
conditions (from least to most significant bit):
■ warm start
■ cold 2 restart
■ cold 1 restart
■ reboot.
A value of 0 indicates that the vector is cleared or not set. See the
Vector-Condition Mapping table that follows.
Vector-Condition Mapping
value warm-start cold-2 cold-1 reboot
0n nnn
1ynnn
get vector
GET RESULTS
Core Dump Vector Set Vector Command Option
0 spe-active
Core Dump Time
SPE_A
SPE_B
Command successfully completed