User's Manual

DEFINITY ECS Release 8.2 Maintenance for R8.2csi 555-233-119 Issue 1
April 2000
Maintenance Commands
2-213set time
2
Feature Interactions
New calls go to time slots reserved for tones on the bus that have not other time
slots when:
■ Time slots on a specified bus are in use
■ Dedicated tone time slots are on the other half of the bus
A
set
command to buses that have calls on dedicated tone time slots drops
these calls.
set time
This command allows changes to the day of the week, the day of the month, the
month, year, hour, and minute. The second field resets to zero (0) whenever the
time on the clock is altered, but cannot be modified by the technician. The day of
the week, entered as a text string, translates to an integer for internal storage.
The system clock time remains the same if no changes are entered on the form.
Output
The following example shows the output for the
set time
command.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
set time
none init
inads
craft
cust
rcust
bcms
browse
System
assigns a
time if the
system clock
is never set
Date and time are
available to software
from a system
primitive.
set time Page 1 of 1
DATE AND TIME
DATE
Day of the Week: _________ Month: _________
Day of the Month: __ Year: ____
TIME
Hour: __ Second:
Minute: __