User's Manual

DEFINITY ECS Release 8.2 Maintenance for R8.2csi 555-233-119 Issue 1
April 2000
Maintenance for csi systems
1-36Logging On/Off
1
Figure 1-9. Command Permissions Categories (Page 3 of 3)
Testing a Login
1. Enter your login name at the login prompt.
After the user enters the correct login name and password and the login is
administered correctly, the system displays the command line interface.
2. Turn on the administration terminal. Verify that the screen displays:
login:
3. Enter your login name, then press
Enter. Verify that the screen displays:
password:
4. Enter your password, then press
Enter.
For security reasons, the password is not displayed as you type it. The
system verifies that a valid login and password name were entered. If an
invalid login or password name was entered, the screen displays:
login incorrect:
, and you must repeat the procedure.
If the system recognizes the login and password name, verify that the
screen displays the software version.
5. For your terminal type, complete one of the following:
a. If the terminal is a 513 BCT, press
Enter. The 513 in brackets [513] is
the system default terminal.
b. If the terminal is a 610 BCT or a 615 MT that has a 513 emulation
cartridge, press
Enter.
c. If the terminal is a 610 BCT or a 615 MT that does not have a 513
emulation cartridge, enter
4410
and press
Enter.
d. If the terminal is any other of the types listed, enter the terminal type
and press
Enter.
Page 3 of 3
COMMAND PERMISSION CATEGORIES
RESTRICTED OBJECT LIST
_______________________ ______________________
_______________________ ______________________
_______________________ ______________________
_______________________ ______________________
_______________________ ______________________
_______________________ ______________________
_______________________ ______________________
_______________________ ______________________
_______________________ ______________________
_______________________ ______________________