User's Manual

Table Of Contents
DEFINITYEnterpriseCommunicationsServerandSystem75andSystem85
Terminals and Adjuncts Reference
555-015-201
Issue 11
December 1999
Adjuncts
20-8Digital Display Modules
20
Stored Number — used to enable inspection of numbers stored in
Abbreviated Dialing (AD) lists or on individual AD buttons, or stored by the
Last Number Dialed feature. On System 85, this function is available on
some versions of R2V3 and R2V4, and G2.
Timer used to start or stop the elapsed timer function on the display
module; displays hours, minutes, and seconds.
Date/Time — used to place the display in the Time of Day and Date mode
which initiates a display of the current time of day and the date.
Other Physical Features
Mounting Options
The Digital Display Module is mounted to the back of the associated voice
terminal at an angle that allows it to be easily used.
Color Options
The Digital Display Module is black or misty cream.
Power
The Digital Display Module requires auxiliary power from an external source. The
Adjunct Power section earlier in this manual lists the recommended power
supplies for the module alone or in combination with other adjuncts.
Considerations
A Digital Display Module and a Call Coverage Module
cannot
be mounted on the
same voice terminal simultaneously. The voice terminal
cannot
be wall mounted if
equipped with the Digital Display Module.
Digital Display Module PECs
The D401A Digital Display Module can be ordered with the following PECs:
D401A Digital Display Module PEC: 31742
D401B Digital Display Module
(Black) PEC: 31742-003
(Misty cream) PEC: 31742-215