User's Manual

12
To program on a button:
1. Label a button.
2. Turn the phone on and press the imprinted
Feat button; then dial 00.
3. Press the labeled button.
4. Dial ✻22 for an inside number,
OR
Dial ✻21 for an outside number.
5. Dial the extension, group page number, or
outside line (with dial-out code).
6. Repeat Steps 1 and 3–5 to program
additional buttons.
7. Press the imprinted Feat button; then dial
00.
To use an Auto Dial button.
1. To make a ringing call, turn the phone on
and press the programmed Auto Dial
button,
OR
To make an inside voice-announced call,
turn the phone on, press an ICOM Voice
or SA Voice button, and then press the
programmed inside Auto Dial button.
2. The call is dialed automatically. If it’s a
voice-announced call, talk after the beep.
Often-Used Features
␣Auto Dial␣
This feature must be programmed on a line button; it dials an inside or outside number. There are
two types of Auto Dial buttons, inside and outside. Use inside Auto Dial buttons to:
• Dial other extensions or groups.
• Page groups (see Paging, p. 16).
Use outside Auto Dial buttons to:
• Dial outside phone numbers (with dial-out codes but without account codes).
• Enter account codes automatically (when programming, include the # at the end).
• Dial long-distance company access codes.
• Dial emergency numbers.
Note that you can also use other features to automate dialing: Last Number Dial (p. 16), Personal
Speed Dial (p. 17), Saved Number Dial (p. 19), and System Speed Dial (p. 19). When programming
Auto Dial, use the Special Characters table on p. 22, if necessary. Include the complete dialing
sequence for the call.