Cajun P333T QS.
Cajun P333T QS.qxd 18/07/2000 12:09 Page 2 Unpack 1 Check the package contents for the following: E If any items are missing or damaged, contact your supplier.
Cajun P333T QS.qxd 18/07/2000 12:09 Page 3 Rack mount (optional) WARNING: Disconnect all cables from the unit before proceeding with the rack installation. 1. Snap open the hinged ends of the unit’s front panel to reveal the screw holes.
Cajun P333T QS.qxd 18/07/2000 12:09 Page 4 Power up Cajun P330 AC Version 1. Insert the power cord into the power connector (BUPS or Power Supply) on the rear of the unit. BUPS connector AC connector 2. Insert the other end of the power cord into the electricity supply or the BUPS connector. K The unit powers up and performs a self test procedure. The LEDs flash at regular intervals after the self-test procedure is completed successfully.
Cajun P333T QS.qxd 18/07/2000 12:09 Page 5 Connect the cables Connect PCs, servers, routers, workstations, and hubs 1. Connect the Ethernet connection cable (not supplied) to a 10/100 Mbps port on the front panel of the Cajun P330. E You should use standard RJ-45 connections. You must use CAT-5 cable for 100 Mbps operation. 2. Connect the other end of the cable to the Ethernet port of the PC, server, router, workstation, switch or hub.
Cajun P333T QS.qxd 18/07/2000 12:09 Page 6 Basic configuration To connect a PC terminal or VT-100 terminal to the Cajun P330 1. If you are using a PC, initiate a VT-100 terminal emulation session using an application such as Windows® HyperTerminal. 2. Press Enter. K The Welcome to Cajun P330 menu is displayed. 3. Type the User name root when prompted and press Enter. 4. Type the User Level password root when prompted and press Enter.
Cajun P333T QS.qxd 18/07/2000 12:09 Page 7 Setting the Parameters If you wish to change the default parameters shown and configure the mandatory parameters, we recommend that you use the Command Line Interface (CLI). E For further information, please refer to Chapter 6 of the Cajun P330 User’s Guide.
Cajun P333T QS.qxd 18/07/2000 12:09 Page 8 Run the Web-Based Manager (optional) E To configure the Cajun P330 you can use the P330 Web-based Manager in addition to using the CLI. System Requirements Minimum hardware and Operating System requirements are: • Windows® 95 or NT® 4.0 or higher • Pentium® 200 Mhz-based computer with 64 Mb of RAM (Pentium-II recommended) • Minimum screen resolution of 1024 x 768 pixels • Microsoft® Internet Explorer® 4 or higher or • Netscape Navigator® 4.
Cajun P333T QS.qxd 18/07/2000 12:09 Page 9 K If you do not have the Java plug-in installed, the following message appears: E If the network manager has configured the system the plug-in should be installed automatically. If the plug-in is not installed automatically, there are three ways to install the plug-in manually: • Either install the plug-in from the CD as follows: 1. Close all unnecessary applications on your PC. 2. Insert the “Cajun P330 Documentation and Utilities” CD in the CD drive. 3.
Cajun P333T QS.
Cajun P333T QS.
Cajun P333T QS.qxd 18/07/2000 12:09 Page 12 Contact Information Lucent Technologies Inc., Enterprise InterNetworking Systems Toll Free: 1-888-ETHERNET Toll Free: (+) 800-CAJUNINF url: http://www.lucent.com/ins Your feedback is important to us! If you have any comments about our documentation, please contact us by e-mail at cajun-info@lucent.com Cajun is a trademark of Lucent Technologies, Inc.