Instruction Manual

Configuring the RIP Routing Protocol (Layer 3)
8-4 Cajun P550/P220 Switch Operation Guide
To create a trusted RIP neighbor:
1. In the RIP Configuration section of the Web Agent window, click Trusted RIP
Neighbors. The Trusted RIP Neighbors dialog box opens.
2. Click CREATE. The Add Trusted RIP Neighbor dialog box opens.
3. Enter the Network Address of the node that acts as the trusted RIP neighbor.
4. Click CREATE to save your changes, or CANCEL to restore previous settings.
Interpreting RIP Statistics
To display RIP statistics:
1. In the RIP Display section of the Web Agent window, click Interface Statistics.
The Interface Statistics dialog box opens.
2. Use Table8-3 to interpret the RIP statistics:
Table8-3. RIP Statistical Parameters
Parameter Defines the...
Interface Interface associated with the IP address specified.
State Current status of the RIP route. UP indicates that the interface is up and
RIP can transmit and receive updates.
IP Address IP address associated with the interface.
Triggered Updates Sent Number of RIP triggered updates sent.
Non-Triggered Updates
Sent
Number of RIP non-triggered updates sent.
Updates Received Number of RIP updates received based on route changes in the IP routing
table.
Bad Packets Received Number of bad packets received on this interface.
Bad Routes Received Number of bad routes received on this interface.