Owner's manual

Configuring AppleTalk Routing (Layer 3)
10
-
8 Cajun P550/P220 Switch Operation Guide
❒
Name deletion
❒
Name lookup
❒
Name confirmation
NBP allows you to bind a name to the internal storage address for your entity and
register this mapping so that other entities can look it up. You can display NBP names to
users and use addresses internally to locate entities. When you register your entity’s
name and address pair, NBP validates its uniqueness.
To create an NBP filter:
1.
In the
AppleTalk Configuration
section of the Web Agent window, click
NBP
Filter
. The AppleTalk NBP Filter dialog box opens.
2.
Click
CREATE
to add a new NBP filter. The Add AppleTalk NBP Filter dialog box
opens.
3.
Use Table 10-3 to configure the NBP filter.
4.
Click
CREATE
to add your new static route, or
CANCEL
to restore previous
settings.
Editing an AppleTalk NBP Filter
To edit an AppleTalk NBP filter:
1.
In the
AppleTalk Configuration
section of the Web Agent window, click
NBP
Filter
. The AppleTalk NBP Filter dialog box opens.
2.
Use Table 10-3 to edit your AppleTalk NBP filter.
Table 10-3. AppleTalk NBP Filter Parameters
Parameter Definition
Access List Enter the access list number to be associated with the NBP
filter. Valid values are 600-631.
Name Enter the name of the NPB name object to be filtered.
Ty p e Select the type of filtering.
Options include:
• Deny
• Permit
Note:
You can also leave this field blank for
wildcarding.
Interface Select the interface(s) to apply this filter to.