Owner's manual

Configuring the Cajun P550 Switch (Layer 2 & Layer 3)
3
-
14 Cajun P550/P220 Switch Operation Guide
To configure switch port parameters:
1.
In the
System Configuration
section of the Web Agent window, select
Modules
& Ports
. The Module Information dialog box opens.
2.
From the
Model Number
column, locate the
module
for which you want to
configure ports. Click the
Switch Ports
column next to the selected module. The
Switch Ports dialog box opens.
3.
In the
Name
column, click the name for the port you want to configure. The
Switch Port Configuration dialog box opens.
Figure 3-4. Switch Port Configuration Dialog Box
Refer to “Configuring Port VLAN Parameters” and “Configuring Non-VLAN Switch
Port Parameters”, later in this chapter, for your specific configuration needs.