Owner's manual

Configuring the Cajun P550 Switch (Layer 2 & Layer 3)
Cajun P550/P220 Switch Operation Guide 3
-
49
3.
From the
Copy Source
pull-down menu, select one of the following:
• Running-Config
- To copy your running configuration to your startup
configuration, to a file located on the switch, or to a file located on a TFTP
server.
•Startup-Config
- To copy your startup configuration to your running
configuration, to a file located on the switch, or to a file located on a TFTP
server.
•
File
- To copy a file stored on the switch to your running or startup
configuration, to a location on the switch, or to a location on a TFTP server.
• TFTP Server
- To copy a file stored on a TFTP server to your running or startup
configuration or to a file on the switch.
If you select
File
or
TFTP Server
, also provide the path and filename of the source
file in the
Source Filename
field.
4.
From the
Copy Destination
pull-down menu, select one of the following:
• Running-Config
- If you are copying your startup configuration, or other file
located on the switch or on a TFTP server, to your running configuration.
•Startup-Config
- If you are copying your running configuration, or other file
located on the switch or on a TFTP server, to your startup configuration.
•File
- If you are copying your startup or running configuration, another file
located on the switch, or a file located on a TFTP server to a file on the switch.
• TFTP Server
- If you are copying your startup or running configuration, or
another file located on the switch, to a location on a TFTP server.
If you select
File
or
TFTP Server
, also provide the path and filename of the
destination file in the
Source Destination
field.
5.
In
TFTP Server IP Address
, enter the IP address of the source or destination TFTP
server, if applicable.
6.
Click
Copy
. Your source configuration or file is copied to your specified
destination.
Note:
The Web Agent returns an
Invalid operation!
error message if you
attempt to copy:
• The current running configuration to the running configuration.
• The startup configuration to the same startup configuration.
• The specified TFTP server to a TFTP server.