User manual

DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506
Issue 1
April 2000
Screen reference
1002Trunk Group
17
Customer-Options screen. If the ATM field is set to y on the System-Parameters
Customer-Option screen, this field accepts only
internal or none. If this field
contains a value other than
internal or none when ATM is y, none appears.
Long Holding Time (hours)
This field appears only when the ACA Assignment field is
y.
Internal Alert
Maintenance Tests
Short Holding Time (seconds)
This field appears when the ACA Assignment field is
y.
Valid entries Usage
internal
Enter internal if the data can be sent to the Basic Call
Management System (BCMS), the VuStats data display, or
both.
external
Enter external to send the data to the CMS.
both
Enter both to collect data internally and to send it to the CMS.
none
Enter none if trunk group measurement reports are not
required.
Valid entries Usage
0
to 10 Enter the length of time (in hours) that the system will consider
as being a long holding time. If you enter
0, the system will not
consider long holding calls.
Valid entries Usage
y/n
Enter y if internal ringing and coverage will be used for
incoming calls.
Valid entries Usage
y/n
Enter y if hourly maintenance tests will be made on this trunk
group. Your entry is not saved when the screen is submitted
unless one or more trunk members are administered.
Valid entries Usage
0
to 160 Enter the length of time (in seconds) that the system considers
as being a short holding time. If
0 is entered, the system will
not consider short holding calls.